Quality and Environmental Certifications
The document indicates that the system is ISO9001 certified for quality and ISO14001 certified for environmental management.

Specifications
The intake/discharge pipe size is ¼" BSP Parallel, with a capacity ranging from 0 to 4.4 gallons per minute (0 to 16.6 liters per minute). The pump is designed to handle solids up to .079 inches (2 mm) and can operate at a head of up to 125 psi or 289 feet of water (8.6 bar or 86 meters). The displacement per stroke is .003 gallons or .01 liters.

Design and Performance
The SANDPIPER® pumps are powered by compressed air and feature a non-stall design. The performance curve provided is based on an elastomer-fitted pump with flooded suction and water at ambient conditions. Deviations may occur with different materials or hydraulic conditions.

Model Variants
The document lists several model variants, including E02 and X02, which are metallic and ATEX compliant. These models are equipped with ball valves and are designed at level 4. The wetted materials are stainless steel, and diaphragm/check valve materials include PTFE-Nitrile and polyester backup options.

Material and Temperature Specifications
Virgin PTFE is used for its chemical inertness, withstanding temperatures from -35°F to 220°F (-37°C to 104°C). It is resistant to most chemicals except molten alkali metals and certain fluoro-chemicals.

Dimensions and Porting
The dimensions of the pumps are provided in both inches and metric units. The air inlet is ¼" NPT(F), and the discharge and suction ports are ¼" BSP Parallel.

Contact Information
Warren Rupp®, a unit of IDEX Corporation, is the manufacturer, with contact details provided for further inquiries.