EUM Series
10Pages

EUM Series Enclosed UniModule EUM Series Clutch/Brakes and Clutch Combinations Totally Enclosed Version The Enclosed UniModule (EUM) packages the hardworking components from EM and UM products into a totally enclosed housing. This rugged housing keeps wear particles in and contaminants out and provides quiet operation. Pre-aligned at the factory, and pre-burnished for rated torque directly out-of-box. For 50, 100 and 180 Sizes Enclosed UniModules, (EUMs) for 50, 100, and 180 sizes, are being replaced by GEN 2 UniModules (UMs) and an easy to install cover kit. For 210 and 215 Sizes Original EUM (black) units are totally enclosed. They are suitable for most industrial applications and tolerate infrequent, light washing. They have aluminum endbells and a finned housing for rapid heat dissipation. Original Design

EUM Series Enclosed UniModule 50, 100, and 180 sizes Contamination-Resistant Design Clean, quiet, operation. Nothing can get in, nothing can get out. Enclosed design eliminates damage to the working components. Prevents friction wear particles from escaping. To convert any Gen 2 UniModule 50, 100, and 180 sizes to an EUM, purchase optional Cover Kit (part number 5370-101-076) Enclosed UniModule Conversion Totally Enclosed Version The Enclosed UniModule (EUM) packages the hardworking components from UM products into a totally enclosed housing. This rugged housing keeps wear particles in and...

EUM Series Enclosed UniModule 210 and 215 sizes Clean, quiet, operation. Nothing can get in, nothing can get out. Enclosed design eliminates damage to the working components. Prevents friction wear particles from escaping. Optional CBC-150 control can be mounted in conduit box Rugged, precision cast housing Single point electrical connection Encapsulated coils – 3 coil voltages Patented Autogaps™ automatically adjust for wear Easy set screw access NEMA C-face compatible design Totally enclosed One piece, C-face package completely assembled and factory aligned. Mates easily with standard...

EUM Series Enclosed UniModule Selection EUM - Selection Procedure Warner Electric EUM clutch/brake modules normally mount in either of two methods: NEMA C-face mounting or base mounting. 2. Determine Technical Requirements b. Base Mounting (2030 Configuration) 1. Select Configuration Enclosed UniModule assemblies may be mounted as separate drive units driven from the prime mover by Vbelts, chain and sprockets, couplings, timing belts and other standard power transmission components. a. NEMA C-face Mounting (1020 and 1040 Configurations) Based on the NEMA C-face frame size of the prime...

EUM Series Enclosed UniModule a. Heat Dissipation Sizing Friction surfaces slip during the initial period of engagement and, as a result, heat is generated. The clutch/brake selected must have a heat dissipation rating greater than the heat generated by the application. Therefore, in high inertia or high cycle rate applications, it is necessary to check the heat dissipation carefully. Inertia, speed and cycle rate are the required parameters. Heat dissipation requirement is calculated as follows: Compare the calculated heat generated in the application to the unit ratings using the heat...

EUM Series Enclosed UniModule Specifications UniModule Size NEMA Frame Size Accessories Warner Electric Enclosed UniModules can be fitted with several accessories to extend their capacity and ease of mounting. Conduit Box NEMA 4 and UL listed, available in standard and washdown versions. Mounting Brackets Two styles of mounting brackets are available for simplified installation. The base mount is used with the 2030 configuration. A motor mount is also available and provides sturdy support for a 1020 or 1040 combination with motor. (Optional) Motor Mount (M) F (4) slots Integral Control The...

EUM Series Enclosed UniModule Selection and Ordering Information Part Numbers Totally Original COMBINED _Q SEPARATE Enclosed EUM Voltage Design GEN 2 Part No. OK GEN 2 Part Numbers Model No. D.C. Part No. UniModule w/kit UniModule and Cover Kit Option Size UniModule Base Mount Kits 50 5370-101-004 Motor Mount Kits 50/100 5370-101-078 * Because of diameter limitations, bases for original design EUMs are available in 4.5" center height (143/145TC) only. nput Clutch Motor or Reducer Mounted Simply combine the size number with the configuration of the required UniModule. Specify voltage. See...

EUM Series Enclosed UniModule EUM-1020 Motor Clutch/Brake Combination A F (Blue shaded areas indicate GEN 2 design) G 1/2" conduit hole both ends K Dimensions (Blue shaded areas indicate GEN 2 design) Size Dimension includes the .500 thick adapter required for mounting to a C-face motor. Specifications (Blue shaded areas indicate GEN 2 design) Model Size NEMA Frame Size * For 56C/48Y Frame motors 3/4 HP and smaller the UM-100 size may be used where extended life is desirable. ** UM-100 size is recommended for motors 1 HP and larger. For standard NEMA frame dimensions, see page 187. Only 50,...

EUM Series Enclosed UniModule EUM-1040 Motor Clutch/Output Clutch Combination A F (Blue shaded areas indicate GEN 2 design) G 1/2" conduit hole both ends K Note: Conduit box is optional and is ordered separately. Dimensions (Blue shaded areas indicate GEN 2 design) Size Dimension includes the .500 thick adapter required for mounting to a C-face motor. Specifications (Blue shaded areas indicate GEN 2 design) Model Size NEMA Frame Size For standard NEMA frame dimensions, see page 187. Only 50 and 180 sizes of the models listed will be converted to the new GEN 2 design. 210 size will continue...

EUM Series Enclosed UniModule EUM-2030 Input Clutch/Brake Combination EUM-2030-B Input Clutch/Brake Combination – Base Mounted A (Blue shaded areas indicate GEN 2 design) conduit hole both ends optional conduit box optional base mount V X Note: Mounting base and conduit box are optional and are ordered separately. Dimensions (Blue shaded areas indicate GEN 2 design) Size Specifications (Blue shaded areas indicate GEN 2 design) Model Size NEMA Frame Size For standard NEMA frame dimensions, see page 187. Only 50 and 180 sizes of the models listed will be converted to the new GEN 2 design. 210...