PNLP Laboratory Pulverizer Grinder Screw Feeder Lab scale pulverizer mills are suitable for coarse, fine and ultra-fine size reduction of almost any material. Such as engineered resins, rubber, adhesives, pharmaceuticals, and food grades on the lab pulverizer.Lab scale pulverizer makes sampling and trials for R&D fast and simple.This laboratory pulverizer can service a wide variety of applications in which top-quality sample powders are required. PNMPjim (fflTP vcm®) Main Drive (kw) (±S£Hg) Dimensions (LxWxH mm)(R\t) PNCP Cryogenic Plastic Pulverizer This PNCP series Cryogenic Pulverizer using liquid nitrogen to lower the input material temperature to material embrittlement condition firstly, then go to the grinding chamber, the input materials were throughly pulverized through blade wheel’ s high speed rotating, and the comprehensive force like mutual repeatedly impact, crash, shear and friction between the materials and blades, fluted disc, materials and materials.The temperature of the cold source for grinding can be reduced to 196 degrees below zero.The grinding fineness can reach 10-700 meshes, and even reach micron fineness. Grinding Motor Power (H$MJUW) Blower Motor Power (JxttflSj^) We have a wide range of pulverizers to meet your different needs including PNMF pulverizers, PNMP pulverizers(used for pulverizing PVC)laboratory pulverizers, liquid nitrogen pulverizers, etc. Cooling Medium ()§M) Liquid nitrogen(>£&) Operation Temperature (IfBSB) Grinding Fineness Degree (JtSfiSRBQ 40-300/40-200mesh(Fcxxl and Medical Polymer Material ffi&Ttitt) 200-1000/100-1000kg/h(Food and Medical fcffifll®§/High Polymer

PNMF-Basic pulverizer PNMF-Plus Pulverizer Rotation Disc Holden Airflow channel is builted in to enhance the overall dissipation of the rotating disc. Adopting SKF bearings, it runs smoothly and nas a long service life. Cooling System: The grinding chamber and rotation disc are optimized ty aerodynamics, which allow the freezing air to take as much as possible of the heat and void material melt. Static Disc Holder: The cooling metnoo is different from the cooled by existing fn system and water-c< Rotation Knife Main Shaft: Made of Cr40, it is a high-quality • alloy steel, anti-wearing after heat...