WANGEN Xpress
12Pages

Part of the Atlas Copco Group Progressing Cavity Pump The pump for low-viscosity media, with the (r)evolution in pump technology: the X-LIFT quick change system.

Progressing Cavity Pump WANGEN Xpress The latest innovation from WANGEN PUMPEN. The Xpress pump range has been specially developed for easy maintenance and to considerably shorten the servicing time and thus reduce costs. This is achieved with a typical WANGEN complete solution that makes no compromises. The X-LIFT quick change system developed by Technical highlights: WANGEN PUMPEN ensures reliable pumping of media and a fast rotor/stator change. The X-LIFT flange is constructed on standard flange design principles. The pump rotor and stator are both constructed in one piece with no risk...

Conveying Materials The following media is typically pumped using the WANGEN Xpress progressing cavity pump: • Raw water • Thin, excess and digested sludge • Polymer solutions, lime milk • Household and industrial waste water with neutral pH • Light aluminium and iron sulphate solutions • Slurry, bovine manure, fermentation residues • Dispersions for glues or galvanic sludges • Starch suspensions, adhesives, resins or pigment sludges • Bilge water on ships • Secondary fibers • Galvanic sludges • Bentonite and rinsing mud • Oil and bituminous emulsions • Press water from separator •...

WANGEN Xpress Construction Characteristics WANGEN Xpress 64 Shaft seal is very easy to replace (see page 7). Robust cardan shaft and joints. covered cardan shaft with NBR-collar (view as cutway model) Inspection ports for easy access to the interior Robust rotor and stator in the highest quality from own manufacturing plant Service Support: 8-edge recess in the base plate for fixing of the stator when disconnecting from the rotor Innovative X-LIFT design of discharge flange for quick rotor/stator change The construction of our pumps clearly shows that they have been consistently designed...

The (r)evolutionary and safe solution The changing of wear parts with very few actions, without removing the pump from the pipeline system, is now possible. The WANGEN Xpress manages this challenge even when there is very little space available thanks to Service in Place. The innovative X-LIFT quick change system from The easy removal of the discharge flange means WANGEN PUMPEN means that the suction housing that WANGEN customers profit exclusively from the remains attached to the pipeline and the discharge benefits of the X-LIFT quick change system. pipeline remains in place. This makes it...

Rotor/stator removal in just 4 steps The new WANGEN X-LIFT quick change system enables the easy removal of rotor and stator and the entire drive section (cardan shaft and joints) in just 4 steps. The pump remains in the installation thus considerably reducing the amount of mounting time required compared to traditional pumps. An Step 1: Undo the connecting rod on the discharge flange side and push back, remove the discharge flange by lifting up. additional benefit of the X-LIFT quick change system on the WANGEN Xpress is that the procedure can generally be carried out by a single person....

Quick change of shaft seal When it comes to changing the shaft seal, the engineers of WANGEN PUMPEN have succeeded in increasing the service-friendliness of the Xpress range. When changing wear parts it is extremely important to position the separating points of components in such a way that the parts that will need to be replaced are easily accessible. This avoids the necessity to remove irrelevant elements Main shaft seal in the pump and reduces the downtimes. Changing the main shaft seal of the WANGEN Xpress can be carried out with just a few actions. Removing the motor from the housing...

Xpress delivery within 1 week The name Xpress stands for quick and easy component changes, but also for another clear feature: The pumps of the Xpress line of products will be delivered within a week. This is possible thanks to the pre-produced standard individual components kept in storage as well as the tried and tested module principle of WANGEN PUMPEN which ensures that the Xpress product line is constantly being further developed. So, for example, our developers have succeeded in covering all areas of use with a low number of product versions, thanks to, among other things,...

Low Life-Cycle Costs When purchasing a pump, we recommend that you carefully consider the operating costs as well as the purchase price. Because maintenance costs, production downtimes and energy costs make up a considerable share of the total costs over the life-cycle of a pump. In this case, a decisive advantage of our philosophy becomes apparent: in order to keep total costs as low as possible over the entire life-cycle of the pump, the frequency of maintenance is restricted In addition, we have energy-efficient drives tailored to a minimum. We achieve this thanks to the specifically to...

Technical Data Versions and Materials In order to ensure the highest possible operating performance, WANGEN PUMPEN only uses the best materials and substances for the purpose in question. Our many years of experiences in the conveyance of various media ensures a design that does justice to modern requirements. • Housing. pressure and suction flange: Cast iron, construction steel 1.0038 • Joint: Cardan joint in steel • Seals: Single acting mechanical seals with bellow or encapsulated version, gland packing LWDcartridge (only Xpress 78 and 94) • Stators: diverse NBR materials • Rotor:...

Technical Data Performance Data WANGEN Xpress Pump size Maximum completely free passage (mm) Maximum differential pressure (bar) WANGEN Xpress 48 on base plate * speed of rotation in frequency inverter operation Side view

Part of the Atlas Copco Group WANGEN PUMPEN is certified to: ISO 9001 (Quality management) Nr. ED122 Your contact: Pumpenfabrik Wangen GmbH Simoniusstrasse 17 88239 Wangen im Allgäu Service hotline: Spare parts: © 2023 Pumpenfabrik Wangen GmbH. We reserve the right to error and technical changes ISO 45001 (Occupational safety and health protection)