Catalogs >
Walther Trowal GmbH&Co.KG >
TT...SM Centrifugal disk finishing machines

TT...SM Centrifugal disk finishing machines
2Pages

Catalog excerpts

TT...SM Centrifugal disk finishing machines - 1

CENTRIFUGAL DISC FINISHING MACHINES TT…-SM TROWAL MASS FINISHING Centrifugal disc ﬁnishing machines TT…-SM,1-Batch System TOP PERFORMANCE! Compared to vibrators, Trowal Turbotron centrifugal disc ﬁnishing machines offer upto 10 times higher grinding performance. Turbotron machines are mainly used for the removal of strong burrs and for the edge radiussing of small and medium size bulk parts. However, due to the application of special processing technologies, Turbotron machines are also suited for ﬁne grinding and even polishing and so called “super polishing” operations. HOW IT WORKS The rotating spinner (60 – 250 RPM) accelerates the work piece / media mass to the wall of the stationary work bowl and pushes the mass upwards along the work bowl wall. With decreasing acceleration and increasing gravity the mass slides back down to the spinner where it is again accelerated.

Open the catalog to page 1

TT...SM Centrifugal disk finishing machines - 2

Machine types Capacity work pieces* (l) Material work bowl Drive mode * Depending on the work piece geometry, material, sensitivity of the parts. The quantity of media and work pieces is determined by these factors. ADVANCED MACHINE TECHNOLOGY • Optimum dynamic geometry of spinner and work bowl • Inﬁnite water level control • Inﬁnitely adjustable speed of the spinner • Automatic gap control via PLC. The gap can be adjusted with a precision of 0.05 mm • Rinsing of gap prevents premature wear of spinner and work bowl • Anti-blocking system prevents “seizure” of the spinner • Additional...

Open the catalog to page 2