TUB VIBRATORS – MODEL RANGE TMV TROWAL SURFACE FINISHING Tub vibrators – model range TMV APPLICATIONS Tub vibrators with their rectangular work bowl are ideal for finishing mid size to large parts, even, depending on the size of the work bowl, very large parts. Normally, the parts are placed into the work bowl loose where they are freely rotating within the processing media. DELICATE PARTS Parts which cannot touch each other during the process because of the risk of part impingement are either clamped with special work piece fixtures, or they are placed individually in separate processing chambers in the work bowl created by special dividers. ALL-PURPOSE MACHINES FOR HEAVY DUTY APPLICATIONS The TMV tub vibrators are especially powerful “all-round” mass finishing machines that are used for a broad range of applications: • General deburring • Heavy duty radiusing (edge breaking) • Surface smoothing • Polishing • De-greasing • Surface cleaning • Pickling, descaling, derusting

Drive power – standard version (kW)* Drive power – ball burnishing version (kW)* Quantity of imbalance units . Standard speed = 1,500 RPM; variable speed with frequency inverter, (optional) **Not available for ball burnishing * IDEAL FOR HEAVY DUTY MASS FINISHING APPLICATIONS The specially designed Multivib vibratory drive system generates a very dynamic, homogeneous rotary movement of the part/media mass over the complete work bowl length. The Multivib system prevents any “dead” areas in the work bowl with less intensive movement and produces the desired finishing results in lower cycle times....