Catalogs >
Walther Trowal GmbH&Co.KG >
Circular vibratory Dryer G

Circular vibratory Dryer G
2Pages

Catalog excerpts

CIRCULAR VIBRATORY DRIERS – MODEL RANGE G TROWAL CIRCULAR VIBRATORY DRIERS Model range G APPLICATIONS After completion of the mass ﬁnishing process the ﬁnished parts are generally wet. Circular vibratory driers of the model range G are utilized for drying the ﬁnished parts. After the parts have been transferred into the G drier they pass through a heated medium that can consist of ground corn cobs (so-called maizorb), crushed walnut shells or small wood chips. The Trowal G driers are ideal for drying a wide assortment of different mass produced parts with the added beneﬁt of the drying medium producing not only a dry but also a clean surface without any residual water spots. THAT’S HOW G DRIERS WORK The vibration induced by the vibratory drive system generates a gentle rolling movement of the parts embedded in the drying medium. Any residual moisture on the part surface is absorbed by the heated medium. Since parts and medium are constantly “rubbing” against each other, the parts are not only dried but, at the same time, obtain a clean, spot-free and polished surface.

Open the catalog to page 1

Speed of vibratory drive (RPM) Total weight, empty (kg) Usable volume (l* Max. work piece dimension (mm)** * Media-to-part ratio generally 3:1, i.e. 3 parts of drying medium to 1 part of work pieces ** Measured diagonally Main dimensions (mm) Machine height Height of infeed chute Discharge height Vertical clearance of infeed chute Horizontal clearance of infeed chute Usable screen width TECHNICAL FEATURES • Spiral processing channel with continuous ascent allows gentle part movement thus reducing the risk of part nicking • Rubber-lined infeed chute built into the outer wall of the work...

Open the catalog to page 2

Circular vibratory Dryer G 2Pages

Catalog excerpts

All Walther Trowal GmbH&Co.KG catalogs and technical brochures

Circular vibratory Dryer G
2Pages