TROWAL SURFACE FINISHING TECHNOLOGY Rotary vibrators – model range CM A WIDE RANGE OF FINISHING APPLICATIONS Trowal rotary vibrators can be used for finishing the surface of a wide variety of work pieces and for all kinds of different processing objectives. Their applications range from aggressive deburring and edge radiusing all the way to high gloss polishing of delicate work pieces, i.e. from aggressive cutdown to generating perfect pre-plate surface finishes. Trowal rotary vibrators are used not only as economical „standalone “machines but can also be integrated into interlinked, fully automatic manufacturing systems. THE SPECIALIST! Trowal rotary vibrators of the model range CM do not have an integrated separation device. Typically, CM vibrators are mainly used for finishing the surface of large and delicate components. The CM range consists of 6 models with work bowl volumes from 110 up to 1,000 liters.

CM 115 Work bowl – gross volume (l) Work bowl – usable volume (l)* Largest work piece dimensions – measured diagonally (mm) CM vibrators are special mass finishing machines offering many functional features: Standard version Drive power at 1500 rpm Ball burnishing version Drive power at 1500 rpm Infinitely adjustable by frequency inverter up to 1,800 rpm Vibratory drier Upon Request “PADDLE WHEEL” DIVIDERS For processing of large, delicate work pieces a “paddle wheel” system is available, which forms separate chambers. Since each chamber only contains one work piece, there is no part-on-part contact...