Spinneret Inspection Microscope PR7-MI

Product catalog summary

Overview: The document describes the PR7-MI, a fully automatic spinneret inspection microscope designed for inspecting spinnerets with integrated cleaning facilities. It features a new design and is manufactured by Walter Uhl.

Specifications:

The microscope is constructed with a welded steel frame and includes two portals for the vision and light tubes.
It has an X-axis travel range of 250 mm and a Y-axis travel range of 400 mm, both with backlash-free linear roller guides and ballscrews.
Two motorized Z-axes are included, also with backlash-free linear roller guides and ballscrews.
The capillary microscope tube features integrated LED lighting and a high-resolution USB digital b/w camera.
Three objectives with long working distances provide on-screen magnifications of 100x, 250x, and 500x.
A counterbore view microscope tube with a high-resolution USB digital color camera offers 125x magnification with halogen ring illumination.
The system includes a scanning microscope and camera for auto-learning and hole position detection.
Transmitted LED light is used for illumination.
An integrated 19” industrial PC with an Intel DualCore processor, at least 160GB hard disk, and 2GB RAM is included, running Windows 7.
A 4-axis high-resolution stepper motor controller with an analog joystick is provided.
A light control and I/O unit are remote-controlled.
A blowing device with a filter and service unit is included for compressed air use.

Software Features:

The IMS-SPIN software allows for automatic inspection with dirt detection and autofocus capabilities.
Multiple spinnerets can be assigned to a holder plate, and inspection history is tracked.
Geometrical measurements of capillaries include area, diameter, perimeter, and specific features like trilobal/octalobal shapes.
Measurement routines are flexible and expandable for new capillary geometries.
Images of capillaries can be stored and reviewed, with user-defined tolerances for inspection.

Additional Information:

Specifications are subject to change without notice.
Customized holder plates with orientation pins are available.

Catalog excerpts

Spinneret Inspection Microscope PR7-MI-1

Spinneret inspection microscope PR7-MI Fully automatic spinneret inspection microscope with sucktion and blowing capillary cleaning facility in new design. Technische Mikroskopie

Open the catalog to page 1

Spinneret Inspection Microscope PR7-MI-2

The PR7-MI spinneret inspection microscope consists on: • Basic instrument in welded steel construction with 2 portals in x-axis for vision tube on top and light tube under the table. Support arm for monitor, keyboard and mouse. • X-axis travel range 250 mm, backlash free linear roller guides and ballscrew • Y-axis travel range 400 mm, backlash free linear roller guides and ballscrew, frame for the holderplates • 2 motorized z-axises, backlash free linear roller guides and ballscrew • Capillary microscope tube with integrated LED lighting for coaxial incident light with infinite optics and high...

Open the catalog to page 2

Spinneret Inspection Microscope PR7-MI-3

- geometrical measurement of capillaries: area, diameter, perimeter, trilobal/octalobal features - flexible, expandable measurement routines for new capillary geometries - stored images of the capillaries during the inspeciton can be reviewed - user defined tolerances for inspeciton with graphical evaluation

Open the catalog to page 3