The FLZ aligment tester is a transportable microscope for the alignment of machine guides. Technische Mikroskopie

Layout for the testing of a carriage guide The measuring wire ist fastened to the headstock or a special holding device, fed at the end of the base over a pulley and stretched tight with a weight (layout according to DIN 8606). The alignment tester must be placed on the carriage of the machine or a corresponding device, which can be moved in a longitudinal direction in predefined steps on the machine base. The measuring wire must be aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting...

Features and accessories Order no.: FLZ Video upgrade kit video system with CCD camera and 5“ TFT monitor for direct attachment to the alignment tester FLZ. Display of the splitimage on the detachable monitor. Alignment Tester FLZ split-image eyepiece, digital measuring system, total magnification approx. 44x including transport box LED illumination retrofittable battery illumination with LED. The illumination is fixed directly on the lens. The LED illuminates a surface below the wire to get a transmitted light effect. Technische Mikroskopie

Wire adjustment equipment Clamping device with magnetic stand to adjust the measuring wire, inclusive 2 weights (for steel and bronze wire). The wire can be adjusted horizontally and vertically. 500g additional weight connectable by a threaded pin LZ.43 Measuring wire up to 6m guide length phosphor bronze wire Ø 0,3 mm, on spindle (1kg), length about 1.8 km Measuring wire over 6m guide length steel wire Ø 0,3 mm, on spindle (1kg), length about 1.8 km Technical data Total magnification Horizontal adjustment range Vertical adjustment range Working adjustment distance Resolution of the digital measuring...