Work more flexibly – parting off and slitting
14Pages

Work more flexibly – parting off and slittin

Parting off and slitting with the new single-edged grooving system. THE CUTTING MATERIAL GRADES The Walter Cut range of grooving tools is being extended with the new SX grooving system. This enables the user to part off and groove, or slit and slot mill, using the same cutting insert. . – Three Tiger·tec® Silver PVD grades: WSM23S, WSM33S and WSM43S for steel, stainless steels and materials that are difficult to machine – One Tiger·tec® Silver CVD grade: WKP23S for steel and cast iron machining – One uncoated grade: WK1 for machining NF metals G2012 R/L tool holder with precision cooling...

Chip breaker groove developed for precision cooling, shortest d istance from the outlet through to the cutting edge Contact surface for transferring the cutting forces into the rigid section of the tool The cutting edge is not weakened by a coolant c hannel in the cutting insert Maximum cost-efficiency in the machining of all material groups through the use of state-of-the-art cutting tool materials, geometries and precision cooling THE CUTTING EDGE WIDTHS 1.5/2.0/3.0/4.0/5.0/6.0/8.0/10.0 mm THE CHIP FORMATION TYPES CE4 – The universal one – Stable cutting edge for maximum feeds – Very good...

Work more flexibly: Deep parting blades with precision cooling. – G2042..N-P parting blades with precision cooling – Blade heights of 26, 32 and 52 mm – Insert widths from 3–10 mm – Grooving to a cutting depth of 100 mm and parting off up to a diameter of 200 mm – Reinforced 3 mm blade for more stability – Two insert seats on one tool – Grooving and parting off on all types of lathes – Can be used universally due to its neutral design – Grooving and parting off along the primary or counter-spindle without interference contour – Can be used starting from 10 bar up to a maximum coolant...

Dual cooling on the rake and flank faces Adjustable grooving range Neutral/universal version O-ring seal clamping block O-ring seal insert G2042..N-P blade Use for coolant transfer – Increase in tool life up to 200% on stainless materials, high-temperature alloys and steel – Plug-and-play: Use on existing machines, as the cooling system can be employed starting from a pressure of 10 bar and without interference contour on the tool – Increase in cutting speed by up to 50%, while maintaining same tool life quantity

More productive due to reinforced contra parting blades with precision cooling. – G2042..R/L-C-P parting blades with reinforced shank and precision cooling – Blade heights of 26 and 32 mm – Insert widths 2–4 mm – Available in right- and left-hand contra version – Grooving to a cutting depth of 33 mm and parting off up to a diameter of 65 mm – Grooving and parting off on all types of lathes – Parting off operations with counter spindle where space is limited – Parting off when using long tool projections with low loss of stability – First choice when using parting blades – Can be used...

Clamping blocks with direct coolant transfer for precision-cooled parting blades. THE TOOLS – Clamping blocks with direct coolant transfer – Blade heights of 26, 32 and 52 mm – Shank dimensions of 20 × 20 mm, 25 × 25 mm, 32 × 25 mm, 32 × 32 mm and 40 × 32 mm THE APPLICATION – Grooving and parting off on all types of lathes – Left-hand/right-hand variant in one block   – Can be used starting from 10 bar up to a maximum coolant pressure of 80 bar Inclined clamping screws for easy blade change in the machine Split clamping block with exchangeable clamping claw O-ring seal Internal coolant...

VDI parting blade adaptors with direct c oolant transfer for star turrets. THE TOOLS: A2110-V..-P – VDI 25/30/40 adaptors for star turrets – Transfer of the coolant directly through the VDI interface VDI double serration for more flexibility Can be converted into overhead variant THE APPLICATIONS – For use on all VDI star turret machines – Grooving and parting off with precision cooling – Can be used starting from 10 bar up to a m aximum coolant pressure of 80 bar Valve for closing the coolant nozzle Screw for adjusting the centre height Closable coolant nozzle for additional/ alternative...

VDI parting blade adaptors with direct c oolant transfer for disc turrets. THE TOOLS – VDI 30/40 adaptors for disc turrets – Transfer of the coolant directly through the VDI interface into the through-cooled parting blade Valve for closing the coolant nozzle VDI double serration for more flexibility THE APPLICATION – For use on all VDI disc turret machines – Grooving and parting off with precision cooling – Can be used starting from 10 bar up to a m aximum coolant pressure of 80 bar Screw for adjusting the centre height Closable coolant nozzle for additional/ alternative external coolant...

BMT/DO parting blade adaptors with direct coolant transfer for precision cooling. BMT/DO interface THE TOOLS – A2110-BT..-P BMT 45/55/60 adaptors for star turrets – A2110-DO..-P DO adaptors for star turrets – Transfer of the coolant directly through the particular interface Valve for closing the coolant nozzle Screw for adjusting the centre height THE APPLICATIONS – For use on machines with BMT interface such as on Doosan Puma TT/TL/MX/Lynx Puma 2100, 2600 & 3100, Hyundai Wia, Hwacheon Cutex, etc. – Grooving and parting off with precision cooling – Can be used starting from 10 bar up to a...

Grooving modules for modular tool holders. – G2632 grooving modules for modular Walter Cut MSS…tool holders – Module heights E20, E25 and E32 mm – Insert widths from 2–8 mm – Grooving to a cutting depth of 45 mm and parting off up to a diameter of 90 mm – Grooving and parting off – For use on modular tool holders with square shank or Walter Capto™ interface Insert widths from 2–8 mm C..-MSS-R00 Order information: Right-hand basic holder and right-hand module C..-MSS-R90 Order information: Left-hand module and right-hand basic holder MSS.. R00 Order information: Right-hand module and...