Tiger·tec® Gold Turning takes time. A tool lifetime
40Pages

Tiger·tec Gold Turning takes time. A tool lifetime. ®

ISO turning – Indexable inserts Product description Tiger·tec® Gold turning grades WPP10G, WPP20G, WPP30G Product range overview Order pages ISO indexable inserts – Negative basic shape ISO indexable inserts – Positive basic shape Indexable inserts for copy turning system – WL Cutting tool material overview Cutting tool material application charts Geometry overview Negative basic shape Positive basic shape Copy turn system inserts – WL Cutting data Negative basic shape

  _TIGER·TEC® GOLD TURNING GRADES WPP10G, WPP20G, WPP30G Powerful in steel and against wear. WPP10G – Wear-resistant for continuous cutting and slightly interrupted cuts – Primary application: Steel ISO P10; Secondary application: Cast iron ISO K20 WPP20G – Universal grade with long tool life and high level of process reliability for approx. 50% of all applications – Primary application: Steel ISO P20; Secondary application: Cast iron ISO K30 WPP30G – Tough grade for interrupted cuts, unstable or unfavourable conditions – Primary application: Steel ISO P30; Secondary application: Cast iron...

APPLICATION EXAMPLE Transmission shaft – Internal machining, dia. 29 mm Tensile strength: 580 N/mm² Tool: Indexable insert: DCMT11T304-FP4 WPP20G Carbide Cutting data Competitor ISO P20 Walter WPP20G Tiger·tec® Gold MT-TiCN – highly textured Tool life (parts) Tiger·tec® Gold Tiger·tec® Gold Wear resistance Verschleißfestigkeit Tiger·tec® Gold Comparison: Tool life quantity Tiger·tec® Gold Tiger·tec® Gold Tiger·tec® Gold Toughness Zähigkeit Conventional TiCN Tiger·tec® Gold Tiger·tec® Gold MT-TiCN – highly textured MT-TiCN – highly textured Increased toughness thanks to multilayer MT-TiCN...

Product range overview of indexable inserts for ISO turning: Carbide – Grades and Geometries Negative basic shape Machining steel ISO P good Wear resistance Tiger·tec® Gold Tiger·tec® Silver Tiger·tec® Gold Positive basic shape MP5: For universal machining MU5: Easy-cutting – for ISO P and ISO M RP5: For universal machining RP7: For interrupted cuts, cast skin/forged skin MP4: For universal machining, copy turning FP6: For semi-finishing operations * Fully ground circumference Negative basic shape single-sided 16 HU3: For universal machining HU5: Easy-cutting WALTER SELECT Optimum indexable...

CNMG / CNMM Tiger·tec® Gold

CNMG / CNMM Tiger·tec® Gold

DNMG / DNMM Tiger·tec® Gold

DNMG / DNMM Tiger·tec® Gold

Negative round RNMG Tiger·tec® Gold HC = Coated carbide HW = Uncoated carbide Negative square SNMG / SNMM Tiger·tec® Gold

Negative square SNMG / SNMM Tiger·tec® Gold

TNMG / TNMM Tiger·tec® Gold

TNMG / TNMM Tiger·tec® Gold

Tiger·tec® Gold

WNMG / WNMM

WNMG / WNMM

CCGT / CCMT Tiger·tec® Gold

CPGT / CPMT Tiger·tec® Gold

DCGT / DCMT Tiger·tec® Gold

DPGT / DPMT Tiger·tec® Gold Positive round RCMT / RCMX Tiger·tec Gold

Positive round RCMT / RCMX Tiger·tec Gold Positive square SCGT / SCMT

Positive square Tiger·tec® Gold TCGT / TCMT Tiger·tec® Gold

TCGT / TCMT Tiger·tec® Gold

TPGN / TPGT / TPMR / TPMT Tiger·tec® Gold

VBMT / VCGT / VCMT Tiger·tec® Gold

Indexable inserts for copy turning system Tiger·tec® Gold Indexable inserts for copy turning system WL...-VC... Tiger·tec® Gold

Cutting tool material application charts – Turning Carbide Application range H Coating composition Indexable insert example Hard materials S Materials with difficult cutting properties Cast iron Stainless steel Standard designation Walter grade designation Coating process C C Primary application C Additional a

Geometry overview of turning inserts – Negative basic shape Finishing operation FW5 – Finishing with wiper technology – Double the feed rate – the same high surface quality – Reduced cutting pressure thanks to short radiused wiper cutting edge FP5 – Finishing steel materials – Can also be used in semi-finishing as an alternative to MP3 – Curved cutting edge for low cutting forces Materials with difficult cutting properties Hard materials Cast iron Remarks/application area Stainless steel Main cutting edge section Corner radius section Medium machining MW5 – Medium machining with wiper...

Geometry overview of turning inserts – Negative basic shape (continued) Roughing operations – Double-sided indexable inserts S Materials with difficult cutting properties Hard materials Cast iron Main cutting edge section Corner radius section RP7 – Interrupted cuts – Cast skins/forged skins – Stable cutting edge RP5 – Roughing steel materials – Stable, positive cutting edge – Open chip groove for a low cutting temperature RM5 – Roughing operations in stainless materials and high-temperature alloys Remarks/application area Stainless steel Primary application Additional application

Geometry overview of turning inserts – Negative basic shape Roughing operations – Single-sided indexable inserts HU5 – Single-sided roughing geometry, for universal application – Curved cutting edge and deep chip breaker groove for low cutting forces – Open chip breaker groove design for reduced heat generation HU7 – Single-sided geometry for challenging roughing operations – Straight cutting edge with negative p rotective chamfer for maximum stability – Chip breaker for reduced friction Cast iron Materials with difficult cutting properties Hard materials Main cutting edge section Corner...