Performance and reliability extend your perspective.
12Pages

_ XTRA·TEC® XT – XTENDED TECHNOLOGY Performance and reliability extend your perspective. Product innovations L WITH AL MME PROGRA NS EXTENSIO

PERFORMANCE AND RELIABILITY IN EQUAL MEASURE – A UNIQUE EXPERIENCE.

Better performance, greater process reliability: The latest generation in the successful range of Walter milling tools not only meets both these requirements but takes them to a whole new level. These two defining characteristics, evident in equal measure, are the product of an innovative and pioneering development process that is opening up a completely new perspective on productivity. The name alone means business: XT stands for Xtended Technology. At Walter, we have never been afraid of setting ourselves ambitious goals. This two-fold challenge – performance and process reliability – is...

THIS IS WHAT “XTENDED TECHNOLOGY” LOOKS LIKE. Improved access to screws Larger cross-section s urrounding the indexable insert hole Larger c ross-sec tion: + 12%  More co ntact: + 34%  Reinforc ed insert p ocket: + 40%  M5130 shoulder milling cutter dia. 63 mm; t = 7 with BCMT160508R-G55 Large contact s urface thanks to reduced clearance angle Maximum stability through new installation position with r einforced insert pocket M5130 shoulder milling cutter New installation position – new possibilities. The installation position of the indexable inserts is skewed by -8°; the clearance angle on...

Universal application due to different cutting edge g eometries and corner radii For machining pockets and circular interpolation milling Xtra·tec® XT M5130 shoulder milling cutter No transitions when resetting thanks to exact 90° angle Four insert sizes for different depths of cut Less effort – more cost-efficiency. Wear-resistant Tiger·tec® grades contribute to the high economic efficiency but also reduced tool inventory costs due to universal applicability, e.g. face and shoulder milling, ramping, pocket milling and circular interpolation milling, or for machining deep shoulders with its...

SIX TIMES AS COST-EFFICIENT – 90° APPROACH ANGLE. Six cutting edges for six times the cost-efficiency M5137 shoulder milling cutter dia. 63 mm; t = 7 with TNMU160508R-G57 Highly positive geometry Approach angle: 90° M5137 shoulder milling cutter Anyone who wants to mill economically must bare their teeth. The M5137 shoulder milling cutter is equipped with triangular, double-sided indexable inserts. Six cutting edges per insert reduce process costs and increase cost-efficiency and productivity when face and shoulder milling, ramping, pocket milling and circular interpolation milling. An...

EIGHT TIMES AS FLEXIBLE – SIMPLY GREAT. 43° approach angle Version with corner radius or facet Free face side – for plunging and circular interpolation milling M5004 octagonal milling cutter dia. 63 mm; t = 6 with ODMT0605ZZN-F57 Positive indexable inserts with eight cutting edges – for maximum cost-efficiency M5004 octagonal milling cutter Higher cutting data, longer tool lives. The M5004 octagonal milling cutter with a 43° approach angle for cutting depths of 3 or 4 mm with three available tooth pitches for different applications guarantees stability and process reliability. In addition...

SIMPLY ECONOMIC – AND STABLE WHEN ROUGHING. 45° approach angle Carbide shim System inserts for various approach angles M5009 face milling cutter, 45° approach angle, dia. 63 mm; t = 5 with SNMX1205ANN-F57 and M5012 face milling cutter, 88° approach angle, dia. 63 mm; t = 5 with SNMX1205ZNN-F57 Indexable inserts with facet or corner radius Easily accessible c lamping screw at an angle for easy handling Eight cutting edges per indexable insert M5009 and M5012 face milling cutters Strong similarities: M5009 and M5012. Both face milling cutters with ScrewFit or bore adaption are d istinguished...

MANY TEETH, QUITE A BITE – HIGH MACHINING VOLUME. Four cutting edges M5008 high-feed milling cutter dia. 32 mm; t = 6 with ENMX08T316R-F47 17° approach angle Stable cutting edge Double-sided indexable inserts M5008 high-feed milling cutter So that high quality comes from high feed. Depth of cut 1 mm, approach angle 17°, two tooth pitches a vailable for different applications, extremely close pitch for m aximum productivity, and more. The M5008 universal high-feed milling cutter combines low depths of cut with high feeds per tooth, allowing it to achieve very high machining volumes. The...

MAXIMUM SECURITY AGAINST INADVERTENT ROTATION. Round, positive indexable insert in seven sizes Cylindrical-modular interface M5468 round insert milling cutter dia. 32 mm; t = 4 with ROMX10T3M08-F67 Indexing of the indexable i nserts using facets Watch the video: M5468 round insert milling cutter A safe bet against insert rotation. The cutting edge indexing of the positive round inserts for the M5468 with up to eight facets offers real anti-rotation p rotection – and consequently process reliability and cost- efficiency. From an insert size of 10 mm, the indexable inserts feature eight...

FINISHING AT THE MAXIMUM PERFORMANCE LEVEL. Compressed air supply or minimum quantity lubrication through an internal coolant channel Interfaces: Weldon or parallel shank or cylindrical modular interface M5460 profile milling cutter dia. 16 mm with P3204-D16 WHH15X high-performance cutting tool material Precision-ground exchangeable inserts, P32, etc. Watch the video: M5460 profile milling cutter Highly efficient for deep cavities. The M5460 Xtra·tec® XT milling cutter is the ideal tool for highly precise finishing of freeform surfaces and deep cavities in steel, stainless steels, cast...

Walter AG Derendinger Straße 53, 72072 Tübingen Postfach 2049, 72010 Tübingen Germany walter-tools.com Walter Austria GmbH Wien, Österreich +43 1 5127300-0, service.at@walter-tools.com Walter Wuxi Co. Ltd. Wuxi, Jiangsu, P.R. China +86 (510) 853 72199, service.cn@walter-tools.com Walter do Brasil Ltda. Sorocaba – SP, Brasil +55 15 32245700, service.br@walter-tools.com Walter Benelux N.V./S.A. Zaventem, Belgique (B) +32 (02) 7258500 (NL) +31 (0) 900 26585-22 service.benelux@walter-tools.com Walter Wuxi Co. Ltd. 中国江苏省无锡市新区新畅南路 3 号 电话：+86-510-8537 2199 邮编：214028 客服热线：400 1510 510...