Multiply your success – with four cutting edge

Multiply your success – with four cutting edges. – Four precision-ground cutting edges ±0.02 mm – Insert widths from 0.50–5.65 mm – Cutting depth up to 6 mm – Four chip formation geometries: GD8, CF5, RF5 and AG – One cutting insert for left and right tool holders – Grooving, parting off, profiling, recessing and thread turning – Where a high degree of precision and small diameters matter – Areas of use: CNC lathe and multi-spindle machines, utomatic a lathes, machines with Walter Capto™ interface THE TOOLS – Grooving and parting off tool with precision cooling – Stable, self-aligning, tangential...

APPLICATION EXAMPLE Grooving in stainless steel – connector THE GEOMETRIES Grooving and parting off Profiling and thread turning – Grooving operations – Straight cutting edge for flat groove base – Grooving and parting off o perations – Excellent chip control – Full-radius grooving operations – Contour turning with small machining allowances – Thread turning operations where space is limited – Thread turning with the same basic holder Indexable insert: Cutting data: Competitors Five-edged grooving insert Walter Four-edged grooving insert Tool life (units) Comparison: Tool life quantity [units]...

Walter Xpress – special profiles delivered within four weeks. THE INDEXABLE INSERT – Insert widths from 0.5–5.5 mm – Cutting depths up to 6 mm – Radii from 0.05–5.4 mm – Parting off approach angles from 3–20° – 30–60° chamfer angle Grooving with chamfer Grooving with full radius APPLICATION EXAMPLE Recess with chamfer – shaft Cutting insert: Xpress 2.2 mm with 0.2 × 45° chamfer Competitors Three-edged grooving insert Walter Four-edged grooving insert Chamfer left Tool life (recesses) Walter Cut MX [Tool life] Chamfer right Chamfering and grooving with corner radii Disadvantages: Longer runtime...

_WALTER CUT G3051-P/MX GROOVING SYSTEM Grooving shoulders in a systematic way. NEW ADDITION TO THE PRODUCT RANGE – G3051-P with MX22-L/R….-GD8 indexable inserts for shoulder machining – New shank sizes: 12 × 12, 16 × 16, 20 × 20, 25 × 25 mm – For precision grooving – Extremely soft cutting action – Light to moderate feeds – For finishing operations on the rear face of a component – Enormous savings on material compared to standard ISO indexable inserts THE INDEXABLE INSERTS – Four precision-ground cutting edges ±0.02 mm – 3° installation position in the groove turning holder – MX22-2L/R; insert...

Walter AG Derendinger Straße 53, 72072 Tübingen Postfach 2049, 72010 Tübingen Germany walter-tools.com Walter GB Ltd. Bromsgrove, England +44 (1527) 839 450, [email protected] Walter Kesici Takımlar Sanayi ve Ticaret Ltd. Şti. Istanbul, Türkiye +90 (0) 216 528 1900 Pbx, [email protected] Walter Wuxi Co. Ltd. Wuxi, Jiangsu, P.R. China +86 (510) 853 72199, [email protected] Walter AG Singapore Pte. Ltd. +65 6773 6180, [email protected] Walter Tools India Pvt. Ltd. Pune, India +91 (20) 3045 7300, [email protected] Walter (Thailand) Co., Ltd. Bangkok,...