Clamping - Handling - Demagnetisation - Heavy handling - Magnetic Drills
56Pages

LI WALMAG MAGNETICS Catalog Clamping ■ Handling - Demagnetisation - Heavy handling - Magnetic Drills

Introduction Like few others in Europe, Walmag Magnetics has a long history in manufacturing of magnetic tools for the engineering industry. The roots of Czech manufacture date back to the 1960s. For 20 years, starting in 1991, the company was part of the international Walker Magnetics Group (USA) and bore the name Walker Pilana Magnetics. She became independent in 2011 and changed the her name to Walmag Magnetics. Our products are well known and used all around the world. Walmag magnetics + Know-how in manufacturing of magnet applications since 1960 + 100% Czech-owned manufacturing company...

PERMANENT MAGNETS ELECTRO-PERMANENT MAGNETS MAGNETIC DRILLING MACHINES 51 NEOMICRO FIXAR - SINE TABLE NEODYMAX NEOMILL COMPACT ELMAX UNIGRIP ELECTROFINE BJP UNIPERM EPEFINE POWERFINE EPEGRIP PICTOGRAMS SURFACE GRINDING CIRCULAR GRINDING MILLING EDM TURNING PALLETS LIFTING CONTROL UNITS NEOGRIP PERMAGRIP FERROMAX NEOSTAR ALUSTAR EM - FINE EM - STAR EM - RING EPESTAR EPERING EPEFINE POWERFINE LAMELLA BLOCKS 48 NEOMILL COMPACT NEOPOWER NEOMICRO NEOSPARK NEOSTAR ALUSTAR NEOMICRO PALLET NEOMILL COMPACT PALLET NEOPOWER PALLET MANUAL HANDLING CONTROL UNITS

CONSTRUCTION + Solid top plate with transverse poles, pole division 1.4 mm steel and 0.5 mm brass + Life span (regrinding limit): 7 mm + Dual Neodymium magnetic system; nominal holding force: 100 N/cm2 + Solid steel base with robust actuating mechanism + Waterproof assembly Also available in Stainless steel - higher wear resistence APPLICATION + Precision grinding of very small and thin up to large components + Recommended minimum workpiece size: 4x4x1 mm + EDM, possible to submerge in dielectric liquid SCOPE OF SUPPLY + Back and end stop + Set of clamps + Allen key

Fixar sine tables come in 2 standard versions: Simple - magnetic chuck tilting over the long side (short lift) Compound - magnetic chuck tilting over both long and short side CONSTRUCTION + Pole pitch 1.9 mm (1.4 mm steel and 0.5 mm brass) + Maximum angle accuracy: +/- 5 seconds of arc + Parallelism: +/- 5 microns/100 mm + Simple sine tables allow setting angles with slip gauges between 0 - 45° + Compound sine tables allow angle settings: on the longitudinal axis between 0 - 45° and on the transverse axis between 0 - 30° Single execution W L C x D H S Weight APPLICATIONS + Precision angle...

CONSTRUCTION + Magnetic system with high energy Neodymium magnets; nominal holding force 120 N/cm2 + Rigid top plate with transverse poles, pole division 5/1/5/1/2/1 mm, steel/stainless steel + Life span (regrinding limit): 6 mm + Solid steel body with robust actuating mechanism + Waterproof assembly APPLICATIONS Precision grinding of small and thin up to large components Spark erosion; possible to submerge in dielectric liquid Light and medium duty surface and pocket milling + Recommended minimum workpiece size: 10 x10 x 5 mm SCOPE OF SUPPLY + Back and end stop + Set of clamps + Allen key

Surface grinding CONSTRUCTION + Flame cut top plate with epoxy resin gaps + Life span (regrinding limit): 10 mm + Pole pitch: 18 and 25 mm depending on chuck size + Solid body with firmly embedded coils + Watertight assembly + Optimized holding force - power consumption ratio + Standard input voltage: 110 VDC + Nominal holding force: 140 N/cm2 Pole W L H P Wattage Weight APPLICATIONS + Rough and finish grinding of medium to large size components + The pole configuration allows to use the clamping surface up to the edges of the chuck + Recommended minimum component size: 36 x 10 and 50 x 15...

Surface grinding CONSTRUCTION + Robust top plate with transverse poles, pole distance 19 mm + Fine pole division steel/brass: 5/0.5/5/0.5/5/3 mm + Life span (regrinding limit): 6 mm + Solid piece body with firmly embedded coils + Standard input voltage: 110 VDC + Waterproof assembly + Nominal holding force: 90 N/cm2 APPLICATIONS + General purpose grinding of medium size up to large components + Recommended minimum workpiece size: 25 x 25 x 5 mm SCOPE OF SUPPLY + Back and end stop + Set of clamps + Power cord of 3 m SUITABLE CONTROL UNIT + Consult with us a suitable control unit and...

Surface grinding CONSTRUCTION + Solid top plate with transverse poles + Pole division: Fine 3 mm steel and 1 mm brass, Microfine 1.4 mm steel and 0.5 mm brass + Life span (regrinding limit): 6 mm + Multi core magnetic system + Solid piece body with firmly embedded coils + Standard input voltage: 110 VDC + Nominal holding force: 100 N/cm2 and 110 N/cm2 + Electrofine chucks with longitudinal poles can also be supplied W L H Wattage Weight Pole H Wattage Weight Pole APPLICATIONS + Surface grinding of small size up to large components + Recommended minimum workpiece size for Electrofine: 25 x...

Surface grinding CONSTRUCTION + Heavy duty top plate with transverse poles; major pole distance: approx. 42 mm + Fine pole division: 4 mm steel and 1 mm brass + Life span (regrinding limit): 7 mm + Multi coil magnetic system + Solid piece body with firmly embedded coils + Standard input voltage: 110 VDC + Waterproof assembly + Nominal holding force: 130 N/cm2 W L H Wattage Weight Cable APPLICATIONS + Heavy duty surface grinding of medium size up to large components + Recommended minimum workpiece size: 35x 35 x 3 mm SCOPE OF SUPPLY + Back and end stop + Set of clamps + Power cord of 4 / 7 m...

Surface grinding Electro-permanent multi-core magnetic system EP technology helps to control the process temperature and the expansion of the workpieces Sturdy top plate with fine division transverse poles 19 mm major pole distance; pole division 4/1/4/1/4/5 steel/brass Rigid, solid body Watertight assembly Nominal holding force: 100 N/cm2 APPLICATION + Medium to high precision grinding operations of a wide range of workpiece sizes + Recommended minimum component size: 36 x 10 x 2 mm SCOPE OF SUPPLY + Back and end stop + Set of clamps + Power cord of 3 m SUITABLE CONTROL UNIT + Consult with...