NEO SERIES PERMANENT LIFT MAGNETS
8Pages

Magnetic Solutions Since 1896 SELF-CONTAINED LIFT MAGNETS Walker Magnetics Walker National Walker Magnetics National

MATERIAL HANDLING Walker Self-Contained Lifting Magnets are versatile, compact and easy Permanent magnets operate by rotating a handle. There are no restrictive cords and no power is needed. Battery Powered magnets use a heavy-duty 12 VDC battery and can be turned on and off using a touch pad mounted on the front of the magnet or a hand held l/R remote transmitter. Circular Electric magnets use recessed Lift and Release push buttons or a hand held l/R remote to power and release the magnet. Self-contained magnets can be used to move material in any plant, shipping/receiving areas and...

LIFT MAGNETS For Flat and Round Material Handling for Flat and Round Material Handling magnets are used in steel service centers, machine and die shops and saw areas where heavy steel objects must be moved quickly and safely. High lift capacity Low weight.. .easy to move Handle locks in "ON & OFF" positions to prevent unintentional operation Meets all the requirements of ANSI/ASME B30.20 (Safety standard) Supplied with manual, pull-test certificate, and safety posters The maximum rated lift capacity is based upon lifting a clean, smooth, flat, low carbon steel plate equal to or thick- er...

For Vertical Loading into Machining Centers and Lathes Lift from Horizontal to Vertical Quickly and Efficiently Walker NEO-HV material lift magnets handle loading of flat, ferrous metal work-pieces onto a machining center or lathes with horizontal spindles. They can also be used to load material into vertical racks for storage. Turn your standard NEO magnet into an HV unit by adding a lift arm. Lifting Capacities (Based on flat AISI 1020 Steel) Rated Lift Cap. Plate Width Plate Length Plate Thickness Arm Length Weight CIRCULAR ELECTRIC LIFT MAGNETS For Flat Material Handling A CER magnet is...

BATTERY POWERED LIFT MAGNETS For Flat and Round Material Handling BUX BM2 MAGNETS have convenient push buttons on the front panel and an l/R remote that operates from up to These magnets are compact, mobile, self-contained using a heavy duty 12 volt battery. Operating on this battery source they are free of restrictive cords and wires. They also have the added advantage of being useful in areas where electricity is not available. STANDARD FEATURES • The battery charger has an automatic cut-off to prevent over-charging battery * Audible Warning Alarm & Flashing Light indicates low battery •...

The Walker Ex-Beam is an adjustable spreader beam that gives you the flexibility to maneuver long unwieldy objects with your choice of tooling apparatus. • The Ex-Beam hangers are reversible for turning rectangular magnets for lifting thin plates less than 1.5" thick • The Ex-10 has 6 adjustments on 4" centers. The Ex-12 has 3 adjustments on 4" Ex10 SPECS- Load Rating (2,200lbs.) Total travel length (66.0") Ex12 SPECS- Load Rating (8,800lbs.) Total travel length (66.0")

MATEFR/AL HANDL/NG '^^^RAIL HANDLING MAGNETS CUTTING-TABLE AMGJVEr SYSTEMS Ntim Magnates Walkar National Walker Magnetic* National

Magnetic Solutions Since 1896 Email: sales@walkermagnet.com Email: egoyette@walkermagnet.com Walker National Email: columbus@walkermagnet.com Stoney Creek, Ontario Canada Email: wmnsales@walkermagnet.com £f^L Printed on recycled paper with 50% recycled content including mW 25% Post Consumer Waste, and is acid and elemental chlorine free.