Electromagnetic Drum separator magnets
4Pages

Magnetic Solutions Since 1896 DRUM TYPE MAGNETIC SEPARATORS Electro & Permanent DEPENDABLE, AUTOMATIC & CONTINUOUS SEPARATION OF FERROUS FROM MATERIALS IN SCRAP, WASTE-TO-ENERGY, SLAG, FOUNDRY SAND AND MINERAL PROCESSING Magnetic Drums are used for separating and concentrating magnetic materials by using a stationary magnet, surrounded by a rotating shell, that imparts movement to attracted materials. Walker Magnetics manufactures two styles of Magnetic Drum Separators, electro and permanent drums, with either radial or axial pole designs, in single or multiple drum Each application requires Walker's expertise and we will work with you to customize the type of Magnetic Drum Separators that will fit your needs. Magnetic Drum Separators can be incorporated into your system and These units offer the benefit of providing you with a Magnetic Drum Separator that requires minimal power consumption and reduces initial installation costs.

AXIAL PGLE DESIGN * • Drum diameters from 36 to 72 inches • Field strengths to suit customers needs using strontium ferrite in permanent magnet units • Variety of cylinder thicknesses • Heavy-duty bearings and seals • Class R insulation on electro units • Non-magnetic drum heads • Heavy-duty bearings and seals Electro Type Walker Electro Magnetic Drums that have axial pole* construction are available in Feed widths up to 10 feet are available. Walker Electro Magnetic Drums are used where increased field strength is required. Electro Drums are primarily used in applications for auto...

RADIAL POLE DESIGN * • Drum diameters from 36 to 72 inches • Field strengths to suit customers needs • Variety of pole configurations • Variety of cylinder materials and linings • Heavy-duty bearings and seals • Class R insulation on electro units • Non-magnetic drum heads • Manganese cleats • Grease while drum is rotating Electro Type Walker Electro Magnetic Drums with radial poles* are available in diameters from 36 to 72 inches and feed widths up to 120 inches Walker provides pole shapes, which are designed specifically for either overfeed or underfeed applications. All the features of...

FACTORS IN CHOOSING A SEPARATOR: As is true in any material handling application, Walker requires information on the characteristics of the product to be separated. The following are important items Walker requires to make a recommendation. • Capacity - Tons/hr. or cu. ft./hr. • Material Density - #cu./ft. • Feed Width or Available Space • Moisture Content • Material Size: - Screen Analysis - Size Range • Magnetic or Ferrous Content (%) •Type of Magnetics Present • Belt Speed if Mounted over Conveyor • Grade Required of Concentrate • Available Power: After Walker reviews the information, a...