*mydirectindustry

Catalogs
Waircom
Solenoid Valves 10 and 15 mm - Series DM and Series UM

Solenoid Valves 10 and 15 mm - Series DM and Series UM

Product catalog summary

Overview: The document provides detailed technical specifications and ordering information for solenoid valves in the 10 mm and 15 mm series, specifically the DM and UM series. These valves are used in various pneumatic functions and are compatible with different fluids and electrical connections.

Specifications:

Operating Pressure: 0 to 7 bar for N.C., 0 to 5 bar for N.O.
Working Temperature: -5°C to +50°C
Fluid Compatibility: Filtered, unlubricated or continuously lubricated compressed air and other compatible fluids.
Max Operating Frequency: ≤ 40 Hz for DM series, ≤ 30 Hz for UM series.
Voltage Options: DC: 6, 12, 24 V; AC: 24 V for DM series. DC: 12, 24 V; AC: 24, 110, 220 V for UM series.
Power Consumption: 1.3 W for DM series, 2.5 W for UM series.
Protection Class: IP 51 - IP 65
Insulation Class: F (155°C)

Materials:

Core: Stainless steel
Body and Manual Override: PA and POM
Springs: Stainless steel
Seals: NBR and FKM rubber

Key Features:

Power Reduction Circuit (CRP): Reduces coil power to prevent overheating, maintaining the solenoid valve in the switched position with reduced power consumption.
Interface Options: ISO 15218 or non-standardized interfaces available.
Pneumatic Functions: Available in 3/2 N.C., 3/2 N.O., and 2/2 N.C. configurations.
Electrical Connections: Options include 90° connectors, in-line connectors, and cables with various lengths and connector types.

Ordering Information: The document provides a detailed order key for specifying the desired configuration of the solenoid valves, including interface type, pneumatic function, electrical connection, exhaust type, manual override, and voltage.

Applications: These solenoid valves are suitable for use as power valves on single and multi-station bases or as control valves in various pneumatic systems.

Catalog excerpts

Solenoid Valves 10 and 15 mm - Series DM and Series UM-3

Direct acting The direct acting solenoid valves series "DM" are produced in the 3/2 N.C. pneumatic function with the interface to ISO 15218 and in the 3/2 N.O. - 3/2 N.C. and 2/2 N.C. pneumatic functions with not standardized interface. These valves can be used with all the fluids that can match the constructive materials. The versions with nominal diameter of 1.1 mm are equipped with "CRP" (Power Reduction Circuit, see below). TECHNICAL DATA Pneumatic function - Electrical connection Nominal diameter Manual override - Coil position - POWER REDUCTION CIRCUIT ("CRP") The small size and the high...

Open the catalog to page 3

Solenoid Valves 10 and 15 mm - Series DM and Series UM-4

Direct acting PNEUMATIC FUNCTIONS WITH NOT STANDARDIZED INTERFACE PNEUMATIC FUNCTION WITH INTERFACE TO ISO 15218 free exhaust WITH CABLES DIMENSIONS OF THE NOT STANDARDIZED INTERFACE " Self-tapping screws for plastic available. See on page 8 for more informations. ' Self-tapping screws for plastic available. See on page 8 for more informations.

Open the catalog to page 4

Solenoid Valves 10 and 15 mm - Series DM and Series UM-5

Direct acting SINGLE BASE WITH NOT STANDARDIZED INTERFACE - DMP5/1 SINGLE BASE WITH INTERFACE TO ISO 15218 - DMIP5/1 MULTI-STATION BASE WITH NOT STANDARDIZED INTERFACE - DMPM5 MULTI-STATION BASE WITH INTERFACE TO ISO 15218 - DMIPM5 on the same base N.O. and N.C. valves. CLOSING PLATE FOR NOT STANDARDIZED INTERFACE - KIT/PC/DM CLOSING PLATE FOR INTERFACE TO ISO 15218 - KIT/PC/DMI

Open the catalog to page 5

Solenoid Valves 10 and 15 mm - Series DM and Series UM-7

Direct acting The direct acting solenoid valves series "UM" are produced in the 3/2 and 2/2 N.C./N.O. pneumatic functions. They are used as power valves if mounted on single and multi-station base, or as control valves if mounted, in the 3/2 pneumatic function, on body valves series "MEV", "MEK", or "UK" These valves can be used with all the fluids that can match the constructive materials. The multi-station bases support both the 3/2 N.O. than the 3/2 N.C. pneumatic functions. TECHNICAL DATA Pneumatic function Electric connection Nominal diameter Manual override - Coil position - ORDER EXAMPLE...

Open the catalog to page 7

Solenoid Valves 10 and 15 mm - Series DM and Series UM-8

Direct acting PNEUMATIC FUNCTIONS free exhaust WITH FASTON FOR MEK192/N CONNECTOR WITH IN-LINE CONNECTOR

Open the catalog to page 8

Solenoid Valves 10 and 15 mm - Series DM and Series UM-9

Direct acting INTERFACE DIMENSIONS ' Self-tapping screws for plastic available. Check page 8 for info. MULTI-STATION BASE WITH CARTRIDGE 04 mm UMP4-2 on the same base N.O. and N.C. valves. on the same base N.O. and N.C. valves. CLOSING PLATE - KIT/PC/UM

Open the catalog to page 9

Solenoid Valves 10 and 15 mm - Series DM and Series UM-10

Connectors for solenoid valves CONNECTOR FOR SOLENOID VALVES WITH 90° CONNECTION OR IN-LINE CONNECTION Cable length CABLE LENGTH Connectors for solenoid valves TECHNICAL DATA Basic connector Connector with LED + VDR as protection 24 V DC/AC Connector with LED + VDR as protection 110 V DC/AC Connector with LED + VDR as protection 220 V DC/AC Connector with LED 24 V DC/AC Connector with LED 110/220 V DC/AC It's possible to order the solenoid valves with self-tapping screws for plastic instead of the standard screws (metric). Drilling fixing dimensions are approximate and we always recommend to...

Open the catalog to page 10

Solenoid Valves 10 and 15 mm - Series DM and Series UM-12

Via Piemonte, 13/15 - 20070 - VIZZOLO PREDABISSI (MILANO) - ITALY Telefono /Telephone: (+ 39) 02.98.23.08.21 - Telefax / Fax: (+ 39) 02.98.23.08.30 www.waircom-mbs.com - [email protected]

Open the catalog to page 12

Solenoid Valves 10 and 15 mm - Series DM and Series UM

Solenoid Valves 10 and 15 mm - Series DM and Series UM

Catalog excerpts

All Waircom catalogs and technical brochures