1. Catalogs
  2. WAGO
  3. WAGO flexROOM® Distribution Box, 2854 Series

WAGO flexROOM® Distribution Box, 2854 Series
1 /2Pages

WAGO flexROOM® Distribution Box, 2854 Series

WAGO flexROOM® Distribution Box, 2854 Series
1 /2Pages

Catalog excerpts

WAGO flexROOM® Distribution Box, 2854 Series-1

WAGO f/exROOM® office distribution boxes support the automation of commercial and functional buildings (offices) with floor plans based on a room axis concept. The boxes automate both lighting and sun protection, while performing single-room control (heating/cooling) for up to 24 room axes. In addition to the room axes, special areas (e.g., stairways, corridors, sanitary facilities) may be automated via specialty f/exROOM® distribution boxes. Control is performed via WAGO 750-884 Application Controller, which is included in the f/exROOM® distribution box and preloaded with a f/exROOM® office application. Initial commissioning (IP address assignment via BootP server) can be performed via WAGOupload PC software. A standard Web browser performs both initial room axis configuration and later reconfiguration directly on the distribution box's controler. Several f/exROOM® distribution boxes can be combined into a network via ETHERNET. A standard Web browser also establishes communication between the distribution boxes. A f/exROOM® distribution box for weather stations can transmit weather data (e.g., outside temperature or wind alarms) to other f/exROOM® distribution boxes for further processing. For the connection of higher-level management stations, each f/exROOM® distribution box provides data in MODBUS tables, that can be read and partly be written by the stations. Configuration data of the f/exROOM® distribution box can cyclically be saved either directly on the included controller or on a separate computer. The f/exROOM® distribution box is equipped with WAGO WINSTA® connectors. The f/exROOM® distribution boxes differ from each other in the number of room axes, the support of specialty application areas, various functions depending on the inputs and outputs used. WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Tel.: +49(0)571/887-0 E-Mail: [email protected] Subject to design changes 24.09.2014 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago.com

 Open the catalog to page 1
WAGO flexROOM® Distribution Box, 2854 Series-2

Power supply 230 V (3 to 5 per distribution box) Network connections 2 x RJ-45 EnOcean gateway RS-485 DALI sensors and DALI lights 1 ... 64 devices Heating/cooling valves 24 VDC PWM flex ROOM® Office Distribution Box Sunblind drives Multi-sensors 230 V 24 V * Support is distribution box specific Special areas* Presence detectors, light buttons 24 VDC Lighting 230 V Technical Data Either Multi-sensors or DALI sensors can be used.

 Open the catalog to page 2

All WAGO catalogs and technical brochures

  1. 789-665

    5  Pages

  2. 752-8400

    3  Pages

  3. WAGO Marking

    92  Pages

  4. Setup unit

    1  Page

  5. KNX IP 1.1 US

    6  Pages

  6. Safety Flyer

    8  Pages

  7. PCB/MCS 12/13 GB

    636  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.