Electrical Interconnections Supplementary Catalog to Full Line Catalogs, Volumes 1/2/5 Edition 2014/1

The new items in this catalog supplement products found in the following main catalogs 1/2/5 Volume 5 WINSTA - The Pluggable Connection System Volume 2 Connectors and PCB Terminal Blocks Volume 1 Rail-Mounted Terminal Block Systems

CONTENTS Rail-Mounted Terminal Block Systems Connectors and PCB Terminal Blocks ​ WINSTA® – The Pluggable Connection System Item Numbers

TOPJOB®@ Double-Deck Terminal Blocks 1 mm² Shield Terminal Blocks 6/10/16 mm² 4-Conductor, Double-Deck Terminal Blocks 2.5 mm² Colored Push-In Type Jumper Bars Pluggable Diode Modules on Carrier Terminal Blocks 2.5 mm² Push-In Type Wire Jumpers Double-Deck Vertical Jumpers TOPJOB®@ Multilevel Installation Terminal Blocks 2.5 mm² Test Plug Adapter N/L for Multilevel Installation Terminal Blocks 2.5 mm² TOPJOB®@ Double-Deck Carrier Terminal Blocks 2.5 mm² TOPJOB®@ Double-Deck Terminal Blocks 2.5 mm² Double-Deck Disconnect Terminal Blocks and Double-Deck Carrier Terminal Blocks 2.5 mm² Double-Deck...

X-COM®@-SYSTEM Carrier Terminal Blocks and Female Plugs 2.5 mm² for Ex Applications Busbar Carriers High-Current, Rail-Mounted Terminal Blocks 185 mm² COMPCT PUSH WIRE® Connectors for Juntion Boxes Separators for Matrix Patching Terminal Blocks Strain Relief Plates for 294 Series 51

TOPJOB®# /CAGE CLAMPS Double-Deck Terminal Blocks 1 (1.5) mm" Terminal block width 3.5 mm / 0.138 in Push-in conductor sizes: 0.5 mm2 - 1.5 mm2 "s" 6 kV = rated surge voltage (see Full Line Catalog, Volume 1, Section 14) Q Strip length, see packaging or instructions.

TOPJOB®@ Double-Deck Terminal Blocks 1 (1.5) mm² 2000 Series 1 Conductor sizes: 0.14 mm² – 1.5 mm² “s + f-st”; Push-in conductor sizes: 0.5 mm² – 1.5 mm² “s” and 0.5 mm² – 0.75 mm² “insulated ferrule, 10 mm” 2 800 V = rated voltage 8 kV = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume 1, Section 14) 3 Strip length, see packaging or instructions. Pack. Unit Ground conductor/through terminal block, with end plate, with marker carrier, gray housing 2000-2248/099-000 50 Shield/N 2000-2258/099-000 50 Shield/L Ground conductor/through terminal block, with end plate, without...

TOPJOB®@ Push-In Type Wire Jumpers and Vertical Jumpers for Double-Deck Terminal Blocks Push-in type wire jumper 800 V/8 kV/3 IN 9 A Conductor size 0.75 mm² Double-deck vertical jumper 500 V/6 kV/3 IN 13.5 A Pack. Unit Push-in type wire jumper, insulated, conductor cross section 0.75 mm², suitable for 2000 and 2020 Series rail-mounted terminal blocks L = 60 mm 100 (10x10) 2009-402 L = 110 mm 100 (10x10) 2009-404 L = 250 mm 100 (10x10) 2009-406 Double-deck vertical jumper, insulated Push down the wire jumper until fully inserted. Lift the jumper with an operating tool for rewiring. Double-deck...

TOPJOB®@ 4-Conductor, Double-Deck Terminal Blocks 2.5 (4) mm² 2002 Series 1 Conductor sizes: 0.25 mm² – 4 mm² “s + f-st”; Push-in conductor sizes: 0.75 mm² – 4 mm² “s” and 0.75 mm² – 2.5 mm² “insulated ferrule, 12 mm” 52,1 mm/2.05 in 62,7 mm/2.47 in 2 800 V = rated voltage 8 kV = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume 1, Section 14) 3 Strip length, see packaging or instructions. 4 See application notes in Full Line Catalog, Volume 1, for: Colored push-in type jumper bars, page 139 Vertical jumper, page 142 Item No. Shield conductor/through terminal block, with...

Terminal block width 7.5 mm / 0.295 in L 13 - 15 mm / 0.55 in 5 Terminal block width 10 mm / 0.394 in L 17 - 19 mm / 0.71 in 5 Pack. Unit Pack. Unit 2-conductor shield terminal block Terminal block width 12 mm / 0.472 in L 18 - 20 mm / 0.75 in 5 2-conductor shield terminal block TOPJOB®@ Shield Terminal Blocks 6 (10) mm², 10 (16) mm² and 16 (25 “f”) mm² 2006/2010/2016 Series Pack. Unit 2-conductor shield terminal block, 15mm-high DIN 35 rails shall be used for a current load higher than 76A! 20 2016-1208 4 white 4

TOPJOB®@ Pluggable Diode Modules on Carrier Terminal Blocks 2.5 (4) mm², 2002 Series Diode module with 1N4007 diode UN 250 V, URM 1000 V IN 1 A Plug width 5.2 mm / 0.205 in 1 Conductor sizes: 0.5 mm² – 10 mm² “s + f-st”; Push-in conductor sizes: 1 mm² – 10 mm² “s” and 1.5 mm² – 6 mm² “insulated ferrule, 12 mm” 1 Length of 2002-1661: 66.5 mm / 2.62 in 2-conductor carrier terminal block 2 Conductor sizes: 0.5 mm² – 16 mm² “s + f-st”; Push-in conductor sizes: 2.5 mm² – 16 mm² “s” and 2.5 mm² – 10 mm² “insulated ferrule, 18 mm” 2 Length of 2002-1861: 87.5 mm / 3.45 in 4-conductor carrier terminal...

Terminal block width 5.2 mm / 0.205 in L 10 - 12 mm / 0.43 in 5 Terminal block width 5.2 mm / 0.205 in L 10 - 12 mm / 0.43 in 5 Terminal block width 5.2 mm / 0.205 in L 10 - 12 mm / 0.43 in 5 Item No. Multilevel installation terminal block, with movable knife disconnect, gray NTi/L/PE 2003-6641 LTi/L/PE 2003-6644 Pack. Unit Item No. Multilevel installation terminal block, gray L/L 2003-6642 N/L 2003-6649 Pack. Unit Item No. Multilevel installation terminal block, gray N/L/PE 2003-6646 L/L/PE 2003-6645 Item-Specific Accessories Test plug adapter N/L, for vertical test slot, gray 2-pole 2003-499...

Accessories for Multilevel Installation Terminal Blocks 1 Conductor sizes: 0.25 mm² – 4 mm² “s + f-st”; Push-in conductor sizes: 0.75 mm² – 4 mm² “s” and 0.75 mm² – 2.5 mm² “insulated ferrules, 12 mm” Multilevel installation terminal block (2003-6641) with N/L test plug adapter (2003-499) for insulation resistance measurement with connected N and L potentials In combination with the 1mm thick end and intermediate plate (2003-6693), the single fuse holder (2004-911) can also be used with the carrier terminal blocks (2003-6640 and 2003-6643). 2 250 V/ 400 V = rated voltage 4 kV/ 6 kV = rated surge...