Catalogs >
WAGO >
Range of water resource applications

Range of water resource applications
6Pages

Catalog excerpts

Range of water resource applications - 1

More than just remote control A remote control substation as per IEC 60870, a controller and an Ex-range signal separator are combined in one device. The user only selects what they really need, from simple input modules to bearing condition monitoring. Expansion is possible at any time. The WAGO-I/O-SYSTEM gets the job done! The WAGO-I/O-SYSTEM has been invented and developed for the industry. More than 380 bus terminals, standardized inputs and outputs, Ex e rated terminals and many special functions can be combined as required and – using a coupler or programmable controller – integrated into the desired data network. Remote control alone is so yesterday, today is defined by WAGO. WAGO Kontakttechnik GmbH & Co. KG P.O. Box 28 80 · 32385 Minden Hansastraße 27 · D-32423 Minden Phone 0571/887-0 Fax 05 71/8 87 - 169 info@wago.com www.wago.com 0888-0171/0001-0101 · Water resource management · 1.0 · E · 11/06 · JA · Printed in Germany · Subject to design changes Water resource management The comprehensive program from installation to automation

Open the catalog to page 1

Range of water resource applications - 2

Power supply family Primary switch mode power supply units in custom made “power classes“ • Built-in protection circuit (on both input and output side) • 12, 24, 30.5 or 48 V output voltage • Output currents from 1 to 40 A • Status and overcurrent indication • Wide range of input voltages, single phase AC 90 V – 264 V and three phase AC 325 V – 550 V • Open circuit and short circuit protected • Reverse polarity protection Fieldbus independent – flexible – future-proof – bit modular • Most compact modular I/O system of its type • Programmable to IEC 61131-3 • Approved for use in hazardous...

Open the catalog to page 2

Range of water resource applications - 3

Complete product family with transducers, isolating amplifiers and relay modules for pluggable relays. • Compact design with only 6mm width • Simple configuration via DIP switch • Integrated safe isolation Test voltage to EN 61140 • High measuring and transmission accuracy • Temperature range -25°C to +60°C • Full jumpering capability Relay socket with pluggable small switching relay • One socket for several relays • Up to two changeover contact elements for the separation of processing and response contacts • Insulated, pluggable jumper system • Pluggable operating indication and reverse...

Open the catalog to page 3

Range of water resource applications - 4

With CAGE CLAMP®S technology for push-in connection of stripped solid wires and ferruled stranded wires up to 16mm² Double deck disconnect terminal blocks • Space saving double deck arrangement • Individual marking options 2– and 4– conductor disconnect terminal blocks • Compact dimensions. • Dual jumper slots, in the same position as the 2002 Series terminal blocks. Rail-mounted terminal blocks for perfect electrical installation applications The complete program up to 16 mm2, directly pluggable

Open the catalog to page 4

Range of water resource applications - 5

System field The WAGO-I/O-SYSTEM collects and bundles signals wherever they come from – even in hazardous areas. On a large wastewater treatment plant, including collector sewers, parallel wiring reaches its limit very quickly. Using the WAGO-I/O-SYSTEM 750, signals are collected locally and transmitted via fieldbus or industrial Ethernet. For example, in a digestion tower, special I/O modules make direct connection from Zone 2 to Zone 0 possible using a standard fieldbus node. Proven in the field

Open the catalog to page 5

Range of water resource applications - 6

Condition monitoring system Analysis of vibration measurements for the diagnostics of wear in bearings and similar machine components • Economical, condition-based maintenance • Warning message via fieldbus • Seamless integration of condition monitoring into the automation environment Safe and economical operation Even condition monitoring is possible using the WAGO-I/O-SYSTEM – at a competitive price.

Open the catalog to page 6