

Catalog excerpts

Data Sheet | Item Number: 752-8400 Edge Controller 400; 3 x ETHERNET; ctrlX OS https://www.wago.com/752-8400 The WAGO Edge Controller 400, with its multi-core CPU performance, is a flexible and open control platform for many applications. Applications in ener gy, industrial IoT and general automation can be flexibly deployed using th Linux®-based ctrlX OS operating system with app technology. The WAGO Edge Controller 400 can be readily adapted to a specific task using app technology that is known from mobile phones. Apps for high-level languages, databases, IEC 61131 programming, EtherCAT®, visualization and many other functions are available. In addition to extensive diagnostic functions, the data layer is an important component of the WAGO Edge Controller 400. This data layer manages all information available on the controller and all apps can securely access this information. This data layer is thus the data backbone of the machine be cause all data is available to the applications transparently and in real-time. Technical data Operating system Zynq UltraScale+, 64 bits, 4 × ARM A53 Internal memory (flash) Non-volatile hardware memory Type of memory card microSD up to 32 GB (all guaranteed properties only valid with WAGO's memory card) 1 x USB host, type C (USB2.0), maximum cable length: 3 m Supply voltage 24 VDC, SELV/PELV (18 … 31.2 V); (includes all tolerances, including ripple); Internal fuse protection with eFuse, 1.5 A; Overvoltage protection: the fuse can trip in the event of overvoltage; Transient protection: suppressor diodes; Pulse load up to 1500 W; Voltage drops on power supply interfaces: PS1 < 1 ms; Evaluation criterion A Overvoltage category 707 VDC (24 V supply to functional ground); 1200 VDC (24 V supply to XF10, XF50, XF51)
Open the catalog to page 1
Width Height Depth 42 mm / 1.652 inches 108.2 mm / 4.256 inches 97.4 mm / 3.831 inches Mechanical data Weight 314 g Environmental requirements Ambient temperature (operation) -25 ... +55 °C (up to 2000 m; Ambient temperature (storage) Protection type Note on protection type Pollution degree Protection class Operating altitude Relative humidity Vibration resistance Shock resistance ESD (contact/air discharge) EMC immunity to interference EMC emission of interference Fire load -40 ... +70 °C IP20 not evaluated by UL 2 per EN 61010-1; no condensation permissible III per DIN EN 61010-2-201 0...
Open the catalog to page 2
Data Sheet | Item Number: 752-8400 https://www.wago.com/752-8400 Environmental Product Compliance Compliance Search Environmental Product Compliance 752-8400 Subject to changes. Please also observe the further product documentation! Current addresses can be found at:: www.wago.com
Open the catalog to page 3All WAGO catalogs and technical brochures
-
789-665
5 Pages
-
Assembled jumper bar; 2-way
2 Pages
-
Assembled jumper bar; 3-way
2 Pages
-
Empty housing; M8; gray
5 Pages
-
WAGO Power Supplies
236 Pages
-
WAGO Marking
92 Pages
-
Setup unit
1 Pages
-
THR Technology
8 Pages
-
KNX IP 1.1 US
6 Pages
-
Electrical Interconnection
56 Pages
-
Overview Relays and Optocouplers
36 Pages
-
Safety Flyer
8 Pages
-
Speedway Brochure 4.2 US
28 Pages
-
Telecontrol Technology 2.0 US
36 Pages
-
WAGO Controllers US
12 Pages
-
Building Automation
40 Pages
-
PCB/MCS 12/13 GB
636 Pages
-
Supplement Interconnection 01/14 US
116 Pages
-
Supplement AUTOMATION 01/14 US
242 Pages
-
Lighting and Equipment 2.0 US
524 Pages
-
AUTOMATION12/13 GB
674 Pages
-
Interface Electronic12/13 GB
460 Pages
-
PSF 4.1 E Product Shortform (S 773)
219 Pages
-
Supplement AUTOMATION 01/13 US
131 Pages
-
WINSTA® 12/13 GB
268 Pages
-
Supplement Interconnection
88 Pages
Archived catalogs
-
References-Water and Sewage
23 Pages
-
References-Marine Engineering
120 Pages
-
References-Power Engineering
92 Pages
-
References-Railway Engineering
152 Pages