*mydirectindustry

Catalogs
WAGO
2857-533 JUMPFLEX® transducer; RTD Threshold value switch

2857-533 JUMPFLEX® transducer; RTD Threshold value switch

Product catalog summary

Overview: The JUMPFLEX® RTD Threshold Value Switch by WAGO is designed for monitoring and reporting signals from RTD sensors, potentiometers, and resistors. It supports up to two switching thresholds and offers various configuration options.

Configuration Options: The device can be configured via DIP switch, interface configuration software, interface configuration app, or a configuration display.

Input Specifications: It accepts input signals from RTD sensors, potentiometers, and resistors, supporting sensor types such as Pt100, Pt200, Pt500, Pt1000, Pt5000, Pt10000, and expanded types up to Pt20000. Sensor connections can be 2-, 3-, or 4-wire.

Output Specifications: The digital output has a maximum switching voltage of supply voltage applied minus 0.3 V and a continuous current of 100 mA. The relay output features a make contact type with a maximum switching voltage of 250 VAC and a continuous current of 6 A (up to 60 °C) or 3 A (60 °C to 70 °C).

General Specifications: The nominal supply voltage is 24 VDC, with a range of 16.8 to 31.2 V. The device has a current consumption of ≤ 40 mA + IDO and a measurement error of ± 1 K.

Environmental Requirements: The operating temperature range is -40 to +70 °C, and the storage temperature range is -40 to +85 °C.

Safety and Protection: The device features a 4 kV AC test voltage for input/output/supply isolation, ensuring safe operation.

Connection and Mounting: It uses a Push-in CAGE CLAMP® connection with a cross-section range of 0.2 to 2.5 mm².

Dimensions and Weight: The dimensions are 12.5 mm x 107 mm x 110 mm, and it weighs 86 g.

Standards and Approvals: The device complies with EN 61010-1 and has EMC immunity and emission standards EN 61000-6-2, EN 61326-2-3, and EN 50121-3-2.

DIP Switch Settings: The DIP switches allow for adjustments in sensor type, connection technology, hysteresis, and rise/fall delay time for relay/digital output.

Catalog excerpts

2857-533 JUMPFLEX® transducer; RTD Threshold value switch-1

JUMPFLEX® Signal Conditioners RTD Threshold Value Switch Short description: WAGO's RTD Threshold Value Switch for RTD sensors, potentiometers and resistors WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Tel.: +49(0)571/887-0 E-Mail: [email protected] Subject to design changes 23.05.2017 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago.com

Open the catalog to page 1

All WAGO catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list