2857-401 JUMPFLEX® transducer; Universal isolation amplifier
1 / 2 PagesView full catalog
2857-401 JUMPFLEX® transducer; Universal isolation amplifier
Product catalog summary
Overview: The JUMPFLEX® Signal Conditioner, specifically the Universal Isolation Amplifier, is designed to convert, amplify, filter, and electrically isolate analog signals. It is suitable for DIN 35 rail mounting and offers various configuration options.
Configuration Options:
- Interface configuration software
- Interface configuration app
- Configuration display
- DIP switch
Key Features:
- Handles both unipolar and bipolar analog signals at input/output.
- Digital signal output with configurable measuring range limits, including ON/OFF delay and threshold value switch function.
- Digital HOLD input to freeze the output signal.
- Clipping capability for analog signal limitation.
- Adjustable software/hardware filter.
- Input/Output response simulation via configuration display.
- Safe 3-way isolation with 4 kV test voltage according to EN 61140.
Technical Data:
- Input Signals: Current and voltage ranges with specific input resistances and maximum operating frequencies.
- Output Signals: Current and voltage ranges with specified load impedances and overload capacities.
- General Specifications: Nominal supply voltage of 24 VDC, with a range of 16.8 V to 31.2 V, and a current consumption of ≤ 70 mA.
- Environmental Requirements: Operating temperature range from -40 °C to +70 °C and storage temperature from -40 °C to +85 °C.
- Safety and Protection: Test voltage of 4 kV AC, 50 Hz, for 1 minute.
- Connection and Mounting: Push-in CAGE CLAMP® connection with specified wire cross sections and strip lengths.
- Dimensions and Weight: Dimensions are 12.5 x 107 x 110 mm, with a weight of 86 g.
Standards and Approvals:
- Conformity with EN 61010-1 and EN 61373.
- EMC immunity and emission standards include EN 61000-6-2, EN 61326-2-3, and EN 50121-3-2.
DIP Switch Configuration:
- S1: Configures input signal type, polarity, range, and limit frequency.
- S2: Configures output signal type, polarity, and digital output settings.
See more
Catalog excerpts
JUMPFLEX® Signal Conditioners Universal Isolation Amplifier Short description: The Universal Isolation Amplifier converts, amplifies, filters and electrically isolates analog WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Tel.: +49(0)571/887-0 E-Mail: [email protected] Subject to design changes 23.05.2017 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago
Open the catalog to page 1
Bipolar only applies to ranges starting with 0.
Open the catalog to page 2All WAGO catalogs and technical brochures
789-6655 Pages
752-84003 Pages
Assembled jumper bar; 2-way2 Pages
Assembled jumper bar; 3-way2 Pages
Empty housing; M8; gray5 Pages
WAGO Power Supplies236 Pages
WAGO Marking92 Pages
Setup unit1 Page
THR Technology8 Pages
KNX IP 1.1 US6 Pages
Electrical Interconnection56 Pages
Overview Relays and Optocouplers36 Pages
Safety Flyer8 Pages
Speedway Brochure 4.2 US28 Pages
Telecontrol Technology 2.0 US36 Pages
WAGO Controllers US12 Pages
Building Automation40 Pages
PCB/MCS 12/13 GB636 Pages
Supplement Interconnection 01/14 US116 Pages
Supplement AUTOMATION 01/14 US242 Pages
Lighting and Equipment 2.0 US524 Pages
AUTOMATION12/13 GB674 Pages
Interface Electronic12/13 GB460 Pages
PSF 4.1 E Product Shortform (S 773)219 Pages
Supplement AUTOMATION 01/13 US131 Pages
WINSTA® 12/13 GB268 Pages
Supplement Interconnection88 Pages
Archived catalogs
References-Railway Engineering152 Pages
References-Power Engineering92 Pages
References-Marine Engineering120 Pages
References-Water and Sewage23 Pages
Related Searches
- Connector
- Power supply unit
- DC power supply
- AC/DC power supply
- Data connector
- Transformer
- Ethernet switch
- LCD screen
- Electrical power supply connector
- Monitor with touchscreen
- Industrial monitor
- Intel® Core™ PC
- Dry transformer
- Industrial network switch
- HDMI PC
- Digital I/O
- Panel-mount screen
- Process software
- Windows software
- Junction block
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.