Professional Finishing TempSpray Airless heated hose systems Easy to operate Perfect surfaces Innovative Qualitynsive! Offe

Professional Finishing Heating instead of diluting - How it works All heating systems are warmed up by an electric heating element, which is located inside the hose, directly in the paint flow. The paint material is heated to the required temperature uniformly along the whole length of the hose (smoothly regulated from 20° to 60° C). This leads to a drop in the viscosity and thus an improvement in the application of paint material. Due to be heated up in the heating hose the coating materials are always at the ideal working temperature - regardless of seasonal temperature fluctuations! Outlet...

. that convince The guarantee for the perfect finish Achieve an optimal surface quality. Thanks to warming up the coating material a very soft spray jet is generated. This increases the atomisation quality. The coating material can be set to the spraying viscosity without being diluted. This is of particular benefit especially for higher viscosity materials. The solution to reduce overspray Heating the material means a reduction in spraying pressure. Heating brings about a reduction in material viscosity, allowing a lower spraying pressure to be set. undercoating jobs Airless units ■ for all...

Change in viscosity due to heating viscosity 100 blue: high viscosity materials orange: low viscosity materials The optimal viscosity - along with the right working technique and equipment - is decisive for a good result when spraying. If the material is too thick the result is an irregular spray pattern and a poor paint distribution. The TempSpray products can be adapted to all Airless units and thus offer a wild field of use. Guarantee - Offensive! With each newly purchased professional paint spraying unit you will get a 3 year manufacturer's guarantee from WAGNER. This is unique in the industry....

TempSpray The benefits of temperature controlled spraying To make coating materials sprayable they usually have to be diluted. Thanks to the heating hose system not only can the solvents be reduced but also the applied film thicknesses can be increased. These are only a few advantages that show these innovative systems. ■ Constant paint temperature even at low outside temperatures. ■ Considerably better working of high viscosity coating materials. ■ ncrease in the atomisation quality. I ■ Excellent edge coverage. ■ Increase in the flow characteristics. ■ Paint savings due to minimised overspray....

Professional Finishing ——————————————————— Basic unit H 126 , 1/4", incl. stainless steel hose DN6, 10 m + Gun AG 14, NPS 1/4", incl. TradeTip 2 nozzle holder, F-thread + TradeTip 2 FineFinish nozzle 410 ——————————————————— Order Ref. No. 2311 852 ——————————————————— ——————————————————— Basic unit Finish 250 on cart + 5 litre hopper + TempSpray H 126 basic unit + Gun AG 14, F-thread 1/4" + TradeTip 2 FineFinish nozzle 410 ——————————————————— Order Ref. No. 2311 850 ——————————————————— ——————————————————— Basic unit H 226 , 1/4", incl. hose reel, heated hose DN10, 15 m, hose 1/4" DN4, 1 m + Gun...