J.Wagner GmbH Otto-Lilienthal-Str. 18 D-88677 Markdorf Tel.: +49(0)75 44 /505-0 Fax: +49(0)75 44 /505-200 www.wagner-systems.com Printed in Germany • subject to changes • GB • 9121-221 • 04/03 The right concept for every coating task SuperTech plastic booth Air extraction rate 12,000 m3/h - 28,000 m3/h Work piece widths 600 mm, 800 mm, 1,000 mm Work piece heights 1,400 mm - 2,200 mm Bottom edge of work piece from 900 mm Internal length 3,000 mm - 8,000 mm Manual coating Can be combined by choice Automatic slots 1-6 per side Mono cyclone and after-filter 12,000 - 28,000 m3/h Modular construction of the peripheral systems The Wagner plastic booths allow all current system components to be combined. All components are replaceable and can be integrated 100 % into the Wagner module concept. floor manual coaters gun slots SuperTech (3,000 - 8,000 mm) outside inside or and/or and/or or belt fixed before after before after 1 2 3 4 5 6 Optimising production The decision on which booth is ideal for which requirement depends of course on the various individual requirements and processes. Thanks to the high level of flexibility and variability of the Wagner systems, it is possible to adapt them to suit all customer requirements. Complementary system components for the powder circuit ¡ Mono cyclone ¡ After-filter systems ¡ Sieving machines ¡ Powder centres ¡ Cleaning accessories Complementary system components for the powder application ¡ Control cabinets ¡ Automatic XL powder guns ¡ Manual powder units ¡ Movement technology ¡ Sensing and recording systems The practical powder supply for multi-colour operation ¡ Powder circulation operation ¡ 2 vibration tables for light/dark operation, optional ¡ Simple operation through a control panel ¡ Option of integral powder extraction, 4,000 m3/h airflow. ¡ Automatic fresh powder dosing with level monitoring Technical data

SuperTech plastic booth for multi-colour operation SPACE SAVING WALK-ON BOOTH FLOOR MANUAL COATING STANDS www.wagner-systems.com Compact and practical – powder changes from 5 minutes! SuperTech

As short as possible – for the quickest colour changes ¡ Manual coating stand also available with reversible stop (opening left or right) ¡ Each manual coating area has additional illumination ¡ Gun holder integrated into the booth wall ¡ Powder extraction belt as an option. This continuously transports the over-spray powder into the powder recovery system ¡ The floors of the booth can be walked on, facilitating cleaning and maintenance work ¡ Excellent illumination of the booth and manual coating stands ¡ Extraction of over-spray on both sides throughout the length of the booth. This creates...

¡ Optimises the production run by avoiding gradients and minimising work-piece spacing ¡ Space-saving pipe installation for powder recovery SuperTech – practical design for a variety of tasks Small and fast The basic thinking behind this booth system can be traced back to this short phrase. Compact dimensions in combination with intelligent detail solutions for all modules bring more productivity on a smaller area with a better coating result. Compact construction: ¡ No pit required ¡ Bottom edge of work piece from 900 mm ¡ Integral conveyor guard panels prevent contamination of the conveyor...