*mydirectindustry

RD45

Product catalog summary

Overview: The RD45 Tandem Rollers are designed for versatility and power, featuring a low machine height, articulated joint, and optimal visibility. These features make them suitable for various applications, ensuring even compaction, high maneuverability, and driving stability. An optional accessory for edge pressing and cutting is available for clean path edges.

Technical Specifications:

Operating Data: The roller has an operating weight of 4,345 kg with ROPS and a maximum of 5,300 kg. Its dimensions are 2,860 x 1,506 x 2,590 mm, with a drum width of 1,380 mm and a diameter of 900 mm. The operating width is 1,430 mm, and it has a ground clearance of 305 mm.
Drum Details: Both front and rear drums are smooth and undivided, with axle loads of 2,175 kg and 2,170 kg, respectively. The curb clearance is 63 mm.
Performance: The roller offers two centrifugal force levels (64 kN and 39 kN) and two frequency levels (60 Hz and 51 Hz). Amplitude levels are 0.51 mm and 0.31 mm, with a linear force of 15.8 N/mm at the front and 15.7 N/mm at the rear. Maximum advance travel is 183 m/min, with gradeability of 30% with vibration and 40% without.
Engine: Powered by a 4-cylinder diesel engine from Kubota, it delivers 34.6 kW according to ISO 14396 standards.
Capacities: The fuel tank holds 73 liters, and the water tank has a capacity of 285 liters.

Additional Information: Product availability may vary by country, and specific operating conditions can affect engine power. For more detailed information, refer to the operator's manual. All data is subject to change and errors excepted.

Catalog excerpts

Powerful and versatile Due to the low machine height, the articulated joint and the optimal view, the RD45 rollers can be used in a variety of ways. Installed articulated pendulum joint ensures for even compaction, a high level of maneuverability and optimal driving stability Optimal visual conditions due to the slim design Edge pressing and cutting equipment for a clean edge of the paths (accessory)

Open the catalog to page 1

Operating data Operating weight with ROPS 4,345 kg Please note: that product availability can vary from country to country. It is possible that information / products may not be available in your country. More detailed information on engine power can be found in the operator's manual; the stated power may vary due to specific operating conditions. Subject to alterations and errors excepted. Applicable also to illustrations. Copyright © 2019 Wacker Neuson SE.

Open the catalog to page 2

All Wacker Neuson SE catalogs and technical brochures

Archived catalogs

Reinforced concrete at the job site
17 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list