Catalogs >
WACHS >
SDB 103/3 Beveler face, bevel and counter bore 1.16” I.D. through 4.5” O.D (29.4mm – 114.3mm). Air-, electric- and hydraulic-powered.

SDB 103/3 Beveler face, bevel and counter bore 1.16” I.D. through 4.5” O.D (29.4mm – 114.3mm). Air-, electric- and hydraulic-powered.
2Pages

Catalog excerpts

SDB 103/3 Beveler face, bevel and counter bore 1.16” I.D. through 4.5” O.D (29.4mm – 114.3mm). Air-, electric- and hydraulic-powered. - 1

Wachs SDB 103/3, a hand held beveling machine that delivers maximum power and performance for fast, accurate weld preps on pipe and tube from .875" I.D. thru 4.5" O.D. (22.2mm to 114.3mm). Face, bevel and counterbore simultaneously on carbon, stainless and high alloy steels. Benefit from the SDBs versatility. Machine boiler tube, heavy wall pipe, thin wall tube, prep elbows and face flanges with the SDB 103/3. > ҕ Aluminum alloy casting is tough yet lightweight. Precision tapered roller bearings and self lubrication bushingsmaximize machine life. Օ Four tool, rotating head with large easy accessӔ tool lockingset screws. High strength, large diameter mandrel and wide profile chucklegs to maximize rigidity. Օ Dual key design makes tool feed easy, absorbs torque andreduces operator fatigue. ՓQuick change extension legs use captivated fasteners. ԕ Standard mandrel covers a broad size range from 1.16" I.D. to4.5" O.D. (29.4-114.3mm) Right angle air motor placement satisfies minimum clearancerequirements. > Օ Lightweight for easy handling. Set up and operate from storagecase to pipe in 5 minutes. Bevels 2" schedule 80 stainless steel pipe in less than oneminute. Օ Simple Operation: Convenient on/off motor valve, adjustablehand grip speed control and in-feed hand wheel with indices for precise measurement. One adjustment, universal three leg chuck automaticallycenters the machine into pipe I.D. Օ Easy ReleaseӔ chuck retracts smoothly for fast machineremoval from pipe. >

Open the catalog to page 1

SDB 103/3 Beveler face, bevel and counter bore 1.16” I.D. through 4.5” O.D (29.4mm – 114.3mm). Air-, electric- and hydraulic-powered. - 2

CAPACITY: MACHINE PIPE AND TUBE SIZES 7/8 I.D. THRU 4.5Ԕ (22.2-114.3 mm) O.D. 2.0 THRU 6.0Ԕ (5.8-152.4 mm) FLANGE O.D. USING SINGLE POINT/FLANGE FACING MODULE. MACHINING FUNCTION: PORTABLE PIPE PREPPING MACHINE: FACE, BEVEL,COMPOUND BEVEL, J PREP, AND COUNTERBORE USING UP TO 4 TOOLS SIMULTANEOUSLY. ? MACHINE FLAT FACE AND RAISED FACE FLANGES, RECORD GROOVE (500 RMS), 250 RMS, 125 RMS, AND 63 RMS SURFACE FINISHES WITH OPTIONAL FLANGE FACING MODULE. CONTROLS: MANUAL TOOL IN-FEED WITH INDICES. (STANDARD)ON/OFF VALVE, HAND GRIP SPEED CONTROL (AIR MOTOR) FEED: MANUAL, INDEXED FEED DIAL WITH...

Open the catalog to page 2