MS650
1 / 2 PagesView full catalog
MS650
Product catalog summary
Overview: The MS 650 is a small and compact multi-turn encoder with SSI (Synchronous Serial Interface) capabilities. It is designed for high precision and flexibility in industrial applications.
Specifications:
- Encoder Capacity: Maximum 25 Bit
- Steps per Revolution: 8192 Steps/Rev
- Number of Revolutions: 4096
- Supply Voltage: 11-27 V DC
- Power Dissipation: Less than 4 Watts (No Load)
- Max Rotational Speed: 6000 RPM
- Max Load on Shaft: 40 N Axial, 60 N Radial
- Lifetime on Bearings: 3.9 x 1010 Revolutions
- Operating Temperature: 0°-60°C (Optional -20° to +70°C)
- Extended Temperature Range: -30° to +80°C
- Weight: 0.7 kg (1.5 lb)
Electrical Specifications:
- Programming: Via RS485 using IBM Compatible EPROG Software
- Output Code: Programmable (Binary, BCD, Gray, etc.)
- Clock Frequency: 95 kHz - 1 MHz
- Data Output: RS422 (2 wire)
- Output Format: Standard, Tree Format, with Repetition
Mechanical Specifications:
- Max Angular Acceleration: ≤ 104 rad/s2
- Startup Momentum at 20°C: 2 Ncm
- Vibration: ≤ 100 m/s2 (10g)
- Shock: ≤ 100 m/s2 (100g)
- Standard Connector: 12 pin Contact Connector - Axial
Environmental Data:
- Electromagnetic Compatibility: EN 61000-4-2 / EN 61000-4-4
- Relative Humidity: 98% (non-condensing)
- Protection Class: IP 65
Ordering Code: The ordering code is structured to specify group function, series number, shaft size, mechanical options, connector type and location, output formats, and circuit type. Special functions and designs are indicated by a 4-digit code at the end of the part number.
Additional Information: Drawings are available in various formats such as dxf, iges, step, and sld files.
See more
Catalog excerpts
SSI (Synchronous Serial Interface) Programmable Encoder Parameters Standard Interchangeable Mounting Flanges
Open the catalog to page 1
ORDERING CODE a Group Function MS = Multi-Turn Absolute Solid Shaft b Basic Series Number 650 c Shaft Size AB = 10 mm d Mechanical Options 0 = None e Connector Type 0 = Cable 7 = 12 Pin Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details h Increm./Rev. (Bits) x Number of Rev. (Bits) f Connector Location A=Axial g Output Formats E = Binary Code(Parallel) G = BCD Code(Parallel) H = 4 to 20 mA (Analog) I = 0 to 10 Volts (Analog) J = SSI (Serial) O = RS-485(Serial) h Output Circuit Type 1 = TTL Line Driver O...
Open the catalog to page 2All W+S Meßsysteme GmbH catalogs and technical brochures
Archived catalogs
GES Encoder Catalogue84 Pages
Related Searches
- W+S rotary encoder
- W+S incremental encoder
- W+S incremental rotary encoder
- W+S absolute rotary encoder
- W+S solid-shaft rotary encoder
- Optical rotary encoder
- W+S hollow-shaft rotary encoder
- W+S industrial rotary encoder
- W+S DC rotary encoder
- W+S IP65 rotary encoder
- IP67 rotary encoder
- W+S compact rotary encoder
- W+S aluminum rotary encoder
- W+S stainless steel rotary encoder
- W+S single-turn rotary encoder
- W+S flange rotary encoder
- W+S ultra-rugged rotary encoder
- W+S SSI rotary encoder
- W+S multi-turn rotary encoder
- W+S digital rotary encoder
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.