Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. W+S Meßsysteme GmbH
  3. IS581

IS581

IS581
1 / 2 PagesView full catalog

IS581

Product catalog summary
Overview: The IS 581 is an incremental shaft encoder designed to meet industry standard size 25 specifications. It offers IP65 protection and a maximum of 25000 pulses per revolution (PPR).
Electrical Specifications:
  • Supply Voltage: 4.75 to 30 V DC
  • Current Consumption: 40 mA (max)
  • Output Circuit: Push-Pull, RS 422A compatible
  • Impulse Frequency: 300 kHz (max)
  • Logic Levels: High - Vcc - 0.7 Volt, Low - 0.25 Volt (max)
  • Short Circuit Protection: 100%
Mechanical Specifications:
  • Material: Aluminium cover and body, Stainless Steel shaft
  • Speed: 8000 RPM (max)
  • Torque: Greater than 0.05 Nm
  • Loading: Axial 40 N, Radial 30 N
  • Protection: IP65
  • Temperature Range: -20˚ to +70˚ C (-4˚ to +158˚ F), with an optional +100˚ C (+212˚ F)
  • Weight: 0.74 lb (320 g)
Output Signals: The encoder provides A, B, and optional gated marker pulse signals, with A leading B in the clockwise direction when facing the shaft. Complimentary channels are also available.
Connection Details: The encoder can be connected using various pin configurations, including 6, 7, 10, and 12 pin connectors, with specific color codes for each function.
Ordering Code: The ordering code is structured to specify the group function, basic series number, shaft size, mechanical options, connector type and location, output signals, and output circuit type. Special functions and designs are indicated by a 4-digit code at the end of the part number.
See more

Catalog excerpts

IS581-1

INCREMENTAL SHAFT ENCODER Industry Standard Size 25 ELECTRICAL SPECIFICATIONS A Leads B in the CW Direction (facing shaft) Optional Gated Marker Pulse Complimentary channel also available Gated with A+B Shown

 Open the catalog to page 1
IS581-2

IS 581 - - a b c d e f g h Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 581 c Shaft Size D 06=6 mm 08=8 mm 10=10 mm AA=1/4” AB=3/8” d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. (6ft.) Cable, 4=6 Pin Mil, 5=7 Pin Mil, 7=12 Pin, 9=10 Pin Mil f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Colour Code Connector

 Open the catalog to page 2

All W+S Meßsysteme GmbH catalogs and technical brochures

  1. Incremental Encoders (IP67) - IX700
    Incremental Encoders (IP67) - IX700

    2  Pages

  2. CH840
    CH840

    2  Pages

  3. CH580
    CH580

    2  Pages

  4. CH410
    CH410

    2  Pages

  5. MH750
    MH750

    2  Pages

  6. MS650
    MS650

    2  Pages

  7. AH740
    AH740

    2  Pages

  8. AH580
    AH580

    2  Pages

  9. AS900
    AS900

    2  Pages

  10. AS580
    AS580

    2  Pages

  11. IH581
    IH581

    2  Pages

  12. IH490
    IH490

    2  Pages

  13. IH360
    IH360

    2  Pages

  14. IS580
    IS580

    2  Pages

  15. IS410
    IS410

    2  Pages

  16. IS280
    IS280

    2  Pages

  17. IS240
    IS240

    2  Pages

  18. IH120
    IH120

    2  Pages

  19. IP700
    IP700

    2  Pages

  20. IS 280
    IS 280

    2  Pages

  21. IS 240
    IS 240

    2  Pages

Archived catalogs

  1. GES Encoder Catalogue
    GES Encoder Catalogue

    84  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.