IS580
IS580
- Supply Voltage: 4.75 to 30 V DC
- Current Consumption: 40 mA (max)
- Output Circuit: Push-Pull, RS 422A
- Impulse Frequency: 300 kHz (max)
- Logic Levels: High - Vcc - 0.7 Volt, Low - 0.25 Volt (max)
- Short Circuit Protection: 100%
- Material: Aluminium cover and body, stainless steel shaft
- Speed: 8000 RPM (max)
- Torque: > 0.05 Nm
- Loading: Axial 40 N, Radial 30 N
- Protection: IP 65
- Temperature Range: -20˚ to +70˚ C (-4˚ to +158˚ F), with an optional +100˚ C (+212˚ F)
- Weight: 0.74 lb (320 g)
Catalog excerpts
INCREMENTAL SHAFT ENCODER Industry Standard Size 25 Syncro Flange Mounting ELECTRICAL SPECIFICATIONS A Leads B in the CW Direction (facing shaft) Optional Gated Marker Pulse Complimentary channel also available Gated with A+B Shown
Open the catalog to page 1
Drawing available as: dxf, iges, step, sld file a Group Function IS=Incremental Solid Shaft b Basic Series Number 580 c Shaft Size D 06=6 mm 10=10 mm d Mechanical Options 0 = None 2=Steel Cover Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details ORDERING CODE e Connector Type 0=2 mtr. (6ft.) Cable 7=12 Pin f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Colour Code Connector white brown green yellow grey pink blue
Open the catalog to page 2All W+S Meßsysteme GmbH catalogs and technical brochures
- Angular encoder
- Incremental encoder
- Incremental rotary encoder
- Absolute rotary encoder
- Solid-shaft rotary encoder
- Hollow-shaft rotary encoder
- Industrial rotary encoder
- IP67 rotary encoder
- Compact rotary encoder
- IP65 rotary encoder
- DC rotary encoder
- Aluminum rotary encoder
- Stainless steel rotary encoder
- Single-turn rotary encoder
- Flange rotary encoder
- Ultra-rugged rotary encoder
- Multi-turn rotary encoder
- SSI angular encoder
- 5VDC rotary encoder
- Analog rotary encoder