IS 280
1 / 2 PagesView full catalog
IS 280
Product catalog summary
Product Overview: The IS 280 is an incremental shaft encoder designed for micro miniature applications. It offers a maximum of 1024 pulses per revolution (PPR) and is compatible with RS 422A standards.
Electrical Specifications: The encoder operates within a supply voltage range of 4.75 to 30 V DC and has a maximum current consumption of 40 mA. It features a push-pull output circuit with a maximum impulse frequency of 100 kHz. The logic levels are defined as Vcc - 0.7 Volt for high and 0.25 Volt (max) for low. It includes 100% short circuit protection.
Mechanical Specifications: The encoder is constructed with an aluminum cover and body, and a stainless steel shaft. It supports a maximum speed of 6000 RPM and a torque greater than 0.04 Nm. The axial loading capacity is 30 N, and the radial loading capacity is 20 N. It is rated with an IP 65 protection level and operates within a temperature range of -20˚ to +70˚ C (-4˚ to +158˚ F). The weight of the encoder is 0.24 lb (110 g).
Output Signals: The encoder provides output signals A and B, with A leading B in the clockwise direction when facing the shaft. A complimentary channel is also available.
Ordering Information: The ordering code is structured as IS 280 - [Shaft Size] - [Mechanical Options] - [Connector Type] - [Connector Location] - [Output Signals] - [Output Circuit Type]. Special functions and designs are indicated by a 4-digit code at the end of the part number.
Connection Details: The encoder uses a specific cable color code for connections: white (0 Volt), brown (+ Volt), green (A), yellow (B), grey (0), pink (A), blue (B), and red (0).
See more
Catalog excerpts
□ □□□□□□□□□a IS 280 INCREMENTAL SHAFT ENCODER Micro Miniature Size 1024 PPR Maximum 4.75 to 30 Volts, RS 422A Compatible 100 kHz Maximum Frequency ELECTRICAL SPECIFICATIONS A Leads B in the CW Direction (facing shaft) Complimentary channel also available
Open the catalog to page 1
Drawing available as: dxf, iges, step, sld file Ø 28.0 ORDERING CODE Group Function IS=Incremental Solid Shaft Connector Type 0=2 mtr. Cable Basic Series Number 280 Connector Location A=Axial Output Circuit Type 3=Push Pull 4.75 to 30 VDC Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details Cable Colour Code
Open the catalog to page 2All W+S Meßsysteme GmbH catalogs and technical brochures
Archived catalogs
GES Encoder Catalogue84 Pages
Related Searches
- W+S rotary encoder
- W+S incremental encoder
- W+S incremental rotary encoder
- W+S absolute rotary encoder
- W+S solid-shaft rotary encoder
- Optical rotary encoder
- W+S hollow-shaft rotary encoder
- W+S industrial rotary encoder
- W+S DC rotary encoder
- W+S IP65 rotary encoder
- IP67 rotary encoder
- W+S compact rotary encoder
- W+S aluminum rotary encoder
- W+S stainless steel rotary encoder
- W+S single-turn rotary encoder
- W+S flange rotary encoder
- W+S ultra-rugged rotary encoder
- W+S SSI rotary encoder
- W+S multi-turn rotary encoder
- W+S digital rotary encoder
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.