*mydirectindustry

IH360

Product catalog summary

Product Overview: The IH 360 is a miniature incremental hollow shaft encoder designed for simple mounting. It offers a maximum of 3600 pulses per revolution (PPR) and is compatible with RS 422 standards.

Electrical Specifications: The encoder operates within a supply voltage range of 4.75 to 30 V DC and has a maximum current consumption of 40 mA. It supports a maximum impulse frequency of 100 kHz. The output circuit is a push-pull type, compatible with RS 422A, with logic levels defined as Vcc - 0.7 Volt for high and 0.25 Volt (max) for low. It includes 100% short circuit protection.

Mechanical Specifications: The encoder is constructed with an aluminum cover and body, and a stainless steel shaft. It can operate at speeds up to 6000 RPM with a torque greater than 0.04 Nm. The axial loading capacity is 20 N, and radial loading is 15 N. It is rated with an IP 65 protection level and can function within a temperature range of -20˚ to +70˚ C (-4˚ to +158˚ F). The weight of the encoder is 0.29 lb (130 g).

Output Signals: The encoder provides output signals A, B, and 0, with A leading B in the clockwise direction when facing the shaft. Complimentary channels are also available.

Ordering Information: The ordering code is structured as IH 360 - a b c d e f g h, where each letter represents specific options such as shaft size, mechanical options, connector type, location, output signals, and circuit type. Special functions and designs are indicated by a 4-digit code at the end of the part number.

Connection Details: The encoder uses a color-coded cable system for connections, with specific colors assigned to each function (e.g., white for 0 Volt, brown for + Volt).

Catalog excerpts

Miniature Size Simple Mounting 3600 PPR Maximum 4.75 to 30 Volts, RS 422 Compatible 100 kHz Maximum Frequency A Leads B in the CW Direction (facing shaft) Complimentary channel also available

Open the catalog to page 1

Drawing available as: dxf, iges, step, sld file ORDERING CODE a Group Function IH=Incremental Hollow Shaft b Basic Series Number 360 c Shaft Size D 06=6 mm AA=1/4“ 08=8 mm 10=10 mm d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. (6ft.) Cable f Connector Location R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Function Cable Colour Code white brown green yellow grey pink blue red

Open the catalog to page 2

All W+S Meßsysteme GmbH catalogs and technical brochures

Incremental Encoders (IP67) - IX700
2 Pages
CH840
2 Pages
CH580
2 Pages
CH410
2 Pages
MH750
2 Pages
MS650
2 Pages
AH740
2 Pages
AH580
2 Pages
AS900
2 Pages
AS580
2 Pages
IH581
2 Pages
IH490
2 Pages
IS581
2 Pages
IS580
2 Pages
IS410
2 Pages
IS280
2 Pages
IS240
2 Pages
IH120
2 Pages
IP700
2 Pages
IS 280
2 Pages
IS 240
2 Pages

Archived catalogs

GES Encoder Catalogue
84 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list