Absolute Multi-Turn Hollow Shaft Encoder CHARACTERISTICS □ Gearless and Battery Free Design □ Blind Hole Shaft Diameter from 20 to 36 mm □ Resolutions Single-Turn from 1 to 16 Bit □ Resolutions Multi-Turn from 1 to 20 Bit MECHANICAL SPECIFICATIONS Cover & Body Aluminum Shaft Stainless Steel Mass moment of inertia Starting Torque (at 25°C) max. Loading on Shaft Operating Temperature > 0.05 Nm Axial 40 N, Radial 30 N < 2000 m/s2 < 300 m/s2 (Cable) ELECTRICAL SPECIFICATIONS SSI OUTPUT Supply Voltage Current Consumption (no load) Output Circuit Pulse frequency Direction Setting DIR <-> Preset/Reset Setting Short Circuit Protection Reverse polarity protection per channel All information without guarantee, errors and changes reserved.

Absolute Multi-Turn Hollow Shaft Encoder Function CableCode GND white *1Vcc for 2 seconds to reset. Connect to GND for normal operation. ELECTRICAL SPECIFICATIONS CANOPEN OUTPUT CANopen 10kBaud up to 1 MBaud 1 up to 127 (defalut 127) Supply Voltage Power Consumption Node Number Short Circuit Protection Reverse polarity protection per channel CONNECTIONS CANOPEN OUTPUT CANHigh green CANLow yellow CANGND shield shield All information without guarantee, errors and changes reserved.

ORDERING CODE Group Function MH = Absolute Multiturn Hollow Shaft e Connection Type 0 = 2 m Cable , 7 = 12 Pin M23 Plug Basic Series Number Resolution Single-Turn 1 to 16 Bit available Resolution Single-Turn 1 to 43 Bit available Connection Location Output Signals J = Binary Code SSI Y = Gray Code SSI Mechanical Option Y = Blind Hole Hollow Shaft Output Circuit Type / Supply Voltage Any special functions and design will be designated by a 4 digit code (Sxxx) at the end of the part number. Consult our Office for your region for further details. If this encoder does not fit your need please also...