*mydirectindustry

Catalogs
W+S Meßsysteme GmbH
Datasheet IH510 (EN)

Datasheet IH510 (EN)

Product catalog summary

Overview: The IH510 is an incremental slim design hollow shaft encoder, designed for easy mounting with a floating bearing system. It features a slim housing design of 51 mm and supports shaft bore diameters from 4 to 8 mm. The encoder offers resolutions ranging from 1 to 3600 pulses per revolution (ppr) and operates with supply voltages of 5 VDC, 4.75-30 VDC, and 8-30 VDC.

Electrical Specifications: The encoder supports a maximum current consumption of 40 mA (no load) and is compatible with Push-Pull, TTL, and RS422A output circuits. It can handle a maximum pulse frequency of 200 kHz, with signal levels of Vcc – 0.7 V (high) and a maximum of 0.25 V (low). It includes short circuit and reverse polarity protection, with ESD and burst protection levels of 8 kV and 2 kV respectively.

Mechanical Specifications: The body and cover are made of aluminum, while the shaft is stainless steel. It supports a maximum speed of 6000 RPM and has a mass moment of inertia of 95 · 10^-6 kgm². The starting torque at 25°C is greater than 0.04 Nm, with maximum axial and radial loading on the shaft of 25 N each. The encoder is rated for shock resistance up to 1000 m/s² and vibration resistance up to 200 m/s². It has an IP65 protection class and operates within a temperature range of -20° to +70°C, with an optional special option for +100°C.

Ordering Code: The ordering code includes options for group function, mechanical options, output signals, basic series number, connection type, shaft size, connector location, output supply voltage, and resolution. Special functions and designs are designated by a code (Sxxx).

Connection and Accessories: The encoder's connection functions include GND, Vcc, A, B, Z, A\, B\, and Z\, with corresponding cable color codes. Accessories include reduction sleeves for adapting shaft sizes from 8 mm to 4 mm or 6 mm.

Catalog excerpts

Incremental Encoder Slim Housing Design 51 mm Easy Mounted with floating bearing system Shaft Bore Diameter from 4 to 8 mm Current Consumption (no load) Output Circuit Pulse Frequency Signal Level (High) Short Circuit Protection Reverse Polarity Protection per Channel Material Body & Cover Material Shaft Max. Speed Mass Moment of Inertia Starting Torque (at 25°C) Max. Loading on Shaft Shock Resistance (6ms) Vibration Resistance (55-2000 Hz) Protection Class (DIN EN 60529) Operating Temperature Aluminum Stainless Steel 6000 RPM 95 ■ 10-6 kgm2 > 0.04 Nm +100°C [+212°F] (Optional: Special Option SHT0) All information without guarantee, errors and changes reserved / REV001. Stand 04/2025

Open the catalog to page 1

Incremental Encoder Dimension in mm (drawing available as: dxf-,iges-, step-,sld-file) Bore Size Diameter D see ordering code Ordering Code a. = Group Function IH = Incremental Encoder b. = Basic Series Number h. = Output, Supply Voltage c. = Shaft Size f. = Connector Location Selectable from 4 to 8 mm R = Radial * Any special functions and design will be designated by a code (Sxxx) at the end of the part number. Consult our Office for your region for further details. If this encoder does not fit your needs, please also consult us for help. All information without guarantee, errors and changes...

Open the catalog to page 2

Incremental Encoder IH510 Incremental Slim Design Hollow Shaft Encoder Connection Function Cable Color Code white brown green yellow grey pink blue red Accessories IH510 Reduction Sleeve B490-8/4 – Reduction Sleeve Series 490/510 from 8 mm to 4 mm B490-8/6 – Reduction Sleeve Series 490/510 from 8 mm to 6 mm All information without guarantee, errors and changes reserved / REV001. Stand 04/2025

Open the catalog to page 3

Datasheet IH510 (EN)

Datasheet IH510 (EN)

Catalog excerpts

All W+S Meßsysteme GmbH catalogs and technical brochures