Incremental Hollow Shaft Encoder CHARACTERISTICS □ Heavy Duty Design and big Bore Diameter □ Shaft Bore Diameter from 100 to 125 mm MECHANICAL SPECIFICATIONS Cover & Body Aluminum Shaft Stainless Steel Mass moment of inertia 320 ■ 10-5 kgm2 (Bore Sizes D= 100mm) 285 ■ 10-5 kgm2 (Bore Sizes D= 125mm) Starting Torque (at 25°C) > 0.2 Nm Operating Temperature Weight Axial 60 N, Radial 80 N < 1000 m/s2 < 200 m/s2 (Cable) < 100 m/s2 (Plug) IP 65 ELECTRICAL SPECIFICATIONS Supply Voltage Current Consumption (no load) Output Circuit Pulse frequency Signal Level (high) Short Circuit Protection Reverse polarity protection p e r c h anne I A leads B in the Clockwise Direction (facing shaft) Complementary Signals are also available (see ordering code) All information without guarantee, errors and changes reserved.

Cable Code ORDERING CODE Group Function Resolution from 1 to 25.000 ppr available e Connection Type 0 = 2 m Cable , 7 = 12 Pin M23 Plug 6 = 9 Pin Sub-D Plug 6 = 10 Pin Mil Plug IH = Incremental Hollow Shaft b Basic Series Number Connection Location Output Signals Mechanical Option Output Circuit Type / Supply Voltage 1 = TTL 5 VDC 3 = Push-Pull 4.75 to 30 VDC 5 = Push-Pull 8 to 30 VDC * Notes: Any special functions and design will be designated by a 4 digit code (Sxxx) at the end of the part number. Consult our Office for your region for further details. If this encoder does not fit your need...