Incremental Hollow Shaft Encoder CHARACTERISTICS □ Shaft Bore Diameter from 60 to 100 mm MECHANICAL SPECIFICATIONS Cover & Body Aluminum Shaft Stainless Steel Mass moment of inertia 210 ■ 10-5 kgm2 (Bore Sizes D= 65mm) 320 ■ 10-6 kgm2 (Bore Sizes D= 100mm) Starting Torque (at 25°C) > 0.2 Nm Operating Temperature Weight Axial 60 N, Radial 80 N < 1000 m/s2 < 200 m/s2 (Cable) < 100 m/s2 (Plug) IP 65 ELECTRICAL SPECIFICATIONS Supply Voltage Current Consumption (no load) Output Circuit Pulse frequency Signal Level (high) Short Circuit Protection Reverse polarity protection p e r c h anne I A leads B in the Clockwise Direction (facing shaft) Complementary Signals are also available (see ordering code) All information without guarantee, errors and changes reserved.

Cable Code ORDERING CODE Group Function Resolution from 1 to 50.000 ppr available e Connection Type 0 = 2 m Cable , 7 = 12 Pin M23 Plug 6 = 9 Pin Sub-D Plug IH = Incremental Hollow Shaft b Basic Series Number Connection Location Output Signals Mechanical Option 0 = None, 1 = Stainless Steel Output Circuit Type / Supply Voltage Any special functions and design will be designated by a 4 digit code (Sxxx) at the end of the part number. Consult our Office for your region for further details. If this encoder does not fit your need please also consult us for help. FURTHER INFORMATION Accessories: Corresponding...