*mydirectindustry

Catalogs
W+S Meßsysteme GmbH
Datasheet CH580 (EN)

Datasheet CH580 (EN)

Product catalog summary

Product Overview: The CH 580 Commutation Hollow Shaft Encoder is a compact, shaft-mounted device designed for precise motion control applications. It offers a maximum of 2048 pulses per revolution (PPR) and supports DC motor commutation signals.

Specifications:

Frequency: Maximum impulse frequency of 300 kHz.
Supply Voltage: Options of 5-15 V DC or 10-30 V DC.
Current Consumption: Up to 100 mA.
Output Circuit: Available in TTL or Push-Pull, RS 422A.
Logic Levels: High at Vcc - 0.7 Volt, Low at 0.25 Volt (max).
Protection: Short circuit protection at 100%.
Materials: Aluminium cover and body, stainless steel shaft.
Speed: Maximum of 10,000 RPM.
Torque: Greater than 0.06 Nm.
Loading: Axial 20 N, Radial 30 N.
Protection Rating: IP 65.
Temperature Range: -20˚ to +70˚ C, with an optional +100˚ C.
Weight: 0.374 lb (170 g).

Mechanical Specifications: The encoder features a commutation signal shown in the clockwise (CW) direction, with A leading B when facing the shaft.

Electrical Specifications: The encoder provides output signals including A, B, 0, U, V, and W, with options for additional complements.

Ordering Information: The encoder can be customized with various mechanical options, connector types, connector locations, output signals, and output circuit types. Special functions and designs are available upon request.

Connection Details: The encoder includes detailed cable color codes and pin connector configurations for both 12-pin and 16-pin connectors.

Catalog excerpts

Compact Construction Shaft Mounted 2048 PPR Maximum DC Motor Commutation Signals ELECTRICAL SPECIFICATIONS Commutation signal shown in the CW direction

Open the catalog to page 1

Drawing available as: dxf, iges, step, sld file ORDERING CODE a Group Function CH=Commutation Hollow Shaft b Basic Series Number 580 c Shaft Size D 06=6 mm 13=13 mm d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. Cable 8=16 Pin f Connector Location R=Radial g Output Signals A=A+B+0+U+V+W B=A+B+0+U+V+W+Compliments h Output Circuit Type 6=5-15 VDC 7=10-30 VDC Colour Code Connector Colour Code Connector

Open the catalog to page 2

All W+S Meßsysteme GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list