*mydirectindustry

CH410

Product catalog summary

Overview: The CH 410 is a commutation hollow shaft encoder designed for motor applications. It is shaft-mounted and provides up to 1024 pulses per revolution (PPR) with a maximum frequency of 200 kHz.

Specifications:

Electrical: Operates with a supply voltage of 5-15 V or 10-30 V DC, consuming a maximum of 100 mA. The output circuit is Push-Pull, RS 422A, with logic levels of Vcc - 0.7 V (high) and 0.25 V (low). It includes 100% short circuit protection.
Mechanical: The encoder is constructed with an aluminum cover and body, and a brass shaft. It supports a maximum speed of 6000 RPM and a torque greater than 0.04 Nm. Axial and radial load capacities are 20 N and 30 N, respectively. It is rated IP 65 for protection and operates within a temperature range of -20˚ to +70˚ C, with an optional extension to +100˚ C.
Physical: The encoder weighs 0.27 lb (130 g).

Output Signals: The encoder provides commutation signals in the CW direction, with A leading B. The output includes signals A, B, 0, U, V, and W.

Connection and Ordering: The encoder is available with various shaft sizes and mechanical options. It can be ordered with different connector types and locations, and output signal configurations. Special functions and designs are available upon request.

Additional Information: Drawings are available in dxf, iges, step, and sld file formats. The encoder features a spring steel flexible butterfly mount and includes two set screws for secure installation.

Catalog excerpts

Commutation Motor Encoder Shaft Mounted 1024 PPR Maximum DC Motor Commutation Signals ELECTRICAL SPECIFICATIONS Commutation signal shown in the CW direction

Open the catalog to page 1

Drawing available as: dxf, iges, step, sld file ORDERING CODE a Group Function CH=Commutation Hollow Shaft b Basic Series Number 410 c Shaft Size D 06=6 mm AA=1/4“ d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. Cable f Connector Location R=Radial g Output Signals A=A+B+0+U+V+W B=A+B+0+U+V+W+Compliments h Output Circuit Type 6=5 to15 VDC 7=10 to 30 VDC Function Cable Colour Code 0 Volt white black violet grey/pink red/blue white/green

Open the catalog to page 2

All W+S Meßsysteme GmbH catalogs and technical brochures

Incremental Encoders (IP67) - IX700
2 Pages
CH840
2 Pages
CH580
2 Pages
MH750
2 Pages
MS650
2 Pages
AH740
2 Pages
AH580
2 Pages
AS900
2 Pages
AS580
2 Pages
IH581
2 Pages
IH490
2 Pages
IH360
2 Pages
IS581
2 Pages
IS580
2 Pages
IS410
2 Pages
IS280
2 Pages
IS240
2 Pages
IH120
2 Pages
IP700
2 Pages
IS 280
2 Pages
IS 240
2 Pages

Archived catalogs

GES Encoder Catalogue
84 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list