AS580
1 / 2 PagesView full catalog
AS580
Product catalog summary
Overview: The AS 580 is an absolute shaft encoder designed to meet industry standard size 25 specifications. It features a syncro flange mounting and offers up to 13 bits (8192) maximum resolution. The encoder supports both Gray Code and Binary Code outputs and includes an optional reset function.
Electrical Specifications: The encoder operates on a supply voltage of either 5 Volt TTL or 8 to 30 Volts DC, with a maximum current consumption of 100 mA. It features a push-pull output circuit compatible with RS 422A and supports an impulse frequency of up to 200 kHz. The logic levels are defined as Vcc - 0.7 Volt for high and 0.25 Volt (max) for low, with 100% short circuit protection.
Mechanical Specifications: The AS 580 is constructed with an aluminum cover and body, and a stainless steel shaft. It can operate at speeds up to 6000 RPM and requires a torque greater than 0.05 Nm. The encoder can handle axial loading of 40 N and radial loading of 30 N. It is rated with an IP 65 protection level and can operate within a temperature range of -20˚ to +70˚ C, with an optional extension to +100˚ C. The unit weighs 0.7 lb (320 g).
Output Signals: The encoder provides output signals in both Gray-Code and Binary formats, with connections available through a 16-pin connector or a 2-meter cable. The color-coded cable connections are detailed for various functions including power, reset, and earth.
Ordering Information: The ordering code for the AS 580 encoder includes options for shaft size, mechanical options, connector type and location, output signals, and output circuit type. Special functions and designs are available upon request and are designated by a 4-digit code at the end of the part number.
See more
Catalog excerpts
Industry Standard Size 25 Syncro Flange Mounting Gray Code or Binary Code Optional Reset
Open the catalog to page 1
Drawing available as: dxf, iges, step, sld file a Group Function AS=Absolute Solid Shaft b Basic Series Number 580 c Shaft Size D 06=6 mm 10=10 mm d Mechanical Options 0=None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. Cable 8=16 Pin f Connector Location A=Axial R=Radial g Output Signals E=Binary <-> F=Gray <-> h Output Circuit Type 1=TTL (5 VDC) 5=Push Pull 8 to 30 VDC Function 16 Pin Cable Function 16 Pin Cable Connector Colour Code Connector Colour Code
Open the catalog to page 2All W+S Meßsysteme GmbH catalogs and technical brochures
Archived catalogs
GES Encoder Catalogue84 Pages
Related Searches
- W+S rotary encoder
- W+S incremental encoder
- W+S incremental rotary encoder
- W+S absolute rotary encoder
- W+S solid-shaft rotary encoder
- Optical rotary encoder
- W+S hollow-shaft rotary encoder
- W+S industrial rotary encoder
- W+S DC rotary encoder
- W+S IP65 rotary encoder
- IP67 rotary encoder
- W+S compact rotary encoder
- W+S aluminum rotary encoder
- W+S stainless steel rotary encoder
- W+S single-turn rotary encoder
- W+S flange rotary encoder
- W+S ultra-rugged rotary encoder
- W+S SSI rotary encoder
- W+S multi-turn rotary encoder
- W+S digital rotary encoder
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.