FFS RETROFIT SOLUTIONS Increase the output of your W&H FFS by up to 50%!
2Pages

FFS RETROFIT SOLUTIONS Increase the output of your W&H FFS by up to 50%! Why FFS Retrofit Solutions? Your advantages • he new FFS dedicated Air Ring with P2K PLUS profile T control heavily increases the bubble stability. Today's Increase bubble stability using a W&H mLLDPE/HDPE based recipes can be controlled up to Eliminate pressure limitations with a Avoid blocking with your re-purposed • Avoid blocking by re-purposing your vacant MULTICOOL air ring and have it installed below the 500 kg/h with perfect consistency in gauge and width. • The all new and dedicated MAXICONE FFS 3 layer die pressure limitation even when ramping up to 500 kg/h head digests these recipes without coming close to a flattening. • Add reinforced IBC blowers and cooling coil with twice the pressure to intensify the IBC air exchange rate for even more output. • Make use of the extra capacity that is buried in your extruder configuration. Technical Data MAXICONE FFS Die Head with diameters 160 and 180 mm FFS Air Ring for diameters 160 and 180 mm • Let W&H take you by the hand to analyze your produc- tion data identifying your current limiting factors. • Have W&H's vintage 2021 machine components retro- fitted to your existing machine where applicable. Often the results are breathtaking and achieve an increase in Learn more about FFS Retrofit Solutions: www.wh.group/int/en/company/news_events/e_magazine/video_optimex_ii_ffs/ Find more information on the back of the page. production capacity that is hard

FFS RETROFIT SOLUTIONS Increase the output of your W&H FFS by up to 50%! When harvesting the extra bubble stability gained from Every project to retrofit an existing line for more output the new FFS air ring and other components, the line needs a professional analysis of the data first. Then a speed will increase accordingly. This reduces the time loadable suggestion is made what modification(s) are for the film to cool down until passing through the applicable to get the best performance from your line(s). primary nip. This will require additional cooling capacity Gaining significantly...