LOKRING® CONNECTORS TYPE 00
34Pages

LOKRING CONNECTORS TYPE 00 ® TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 RESPECT PROPRIETARY NOTICE PER ISO 16016!

3.0 COMPONENTS OF A LOKRING® CONNECTION & ASSEMBLY TOOLS 03 6.0 TECHNICAL SPECIFICATIONS AND APPROVALS OF THE LOKRING CONNECTION 05 7.3 STRAIGHT BRASS REDUCING CONNECTORS 08 7.4 STRAIGHT ALUMINIUM REDUCING CONNECTORS 10 7.6 CONNECTORS WITH SCHRADER VALVES 12 LOKRING® TUBE CONNECTORS 22 LOKRING® CAPILLARY REDUCING CONNECTORS 22 LOKRING® T-REDUCING CONNECTORS 24 LOKRING® PRE-ASSEMBLY FITTING VME 26 VALIDITY CLAUSE

VULKAN LOKRING LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 | 03 LOKRING* CONNECTORS TYPE 00 1.0 INTRODUCTION The purpose of this document is to give technicians all information necessary about the solder-free LOKRING® tube connection technology in general and especially about LOKRING® connectors type 00. LOKRING® CONNECTORS TYPE 00 are being used in: ® Household refrigeration appliances (refrigerators, freezers, wine coolers) @ Ready-to-use refrigeration equipment (refrigeration cabinets, bars, lockers, chillers) © Refrigeration equipment for catering (sales...

04 | LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 VULKAN LOKRING LOKRING CONNECTORS TYPE 00 ® The LOKRING® tube connection works on the basis of »simple« physical laws. It consists of two rings and one tubular joint which takes the two tube ends. During assembly, the tube ends are inserted into the joint to the inner limit. Then an assembly tool is used to push the two rings axially onto the joint. Due to the conical inner contour of the rings, the diameter of the joint is reduced during assembly so that the tube and the joint form a metallic hermetic...

LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 | 05 VULKAN LOKRING Check the expiry date before applying LOKPREP 65G. Always make sure that the whole tube circumference is moistened with LOKPREP 65G. STEP 1 Apply LOKPREP 65G onto the metallic cleaned tube. Always make sure that the LOKPREP 65G is properly cured before exerting any force on the LOKRING connection by moving, turning or bending the tube. STEP 2 Rotate the joint through 360° around the end of the tubes. 6.0 TECHNICAL SPECIFICATIONS AND APPROVALS FOR THE SERVICE CONNECTORS Reference standards: EN...

VULKAN LOKRING 06 | LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 STRAIGHT CONNECTORS 7.0 PRODUCTS 7.1 STRAIGHT BRASS CONNECTORS Please note: Both sides have the same dimensions (ODC/ODT/LID) and the shape / ring material of the connector can vary depending on size. Article no. Article name L13000575 LOKRING 1.6 NK Ms 00 L13000932 LOKRING 1.8 NK Ms 00 L13000576 LOKRING 2 NK Ms 00 L13000578 LOKRING 2.2 NK Ms 00 L13000579 LOKRING 2.5 NK Ms 00 L13000580 LOKRING 3 NK Ms 00 L13000582 LOKRING 3.2 NK Ms 00 L13000584 LOKRING 4 NK Ms 00 L13000587 LOKRING 5 NK Ms...

VULKAN LOKRING LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 | 07 Please note: Both sides have the same dimensions (ODC/ODT/LID) and the shape / ring material of the connector can vary depending on size. Article no. Article name Dimension Notes

08 | LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 VULKAN LOKRING STRAIGHT REDUCING CONNECTORS 7.3 STRAIGHT REDUCING CONNECTORS diameter connector) Please note: The shape / ring material of the connector can vary depending on size. Article name *see LOKRING Assembly instruction (capillary reducing connectors).

VULKAN LOKRING LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 | 09 Notes Article no. Article name Dimension *see LOKRING Assembly instruction (capillary reducing connectors).

10 | LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 VULKAN LOKRING STRAIGHT REDUCING CONNECTORS 7.4 STRAIGHT ALUMINIUM REDUCING CONNECTORS diameter connector) Please note: The shape / ring material of the connector can vary depending on size. Article name *see LOKRING Assembly instruction (capillary reducing connectors).

VULKAN LOKRING LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 | 11 Please note: The shape / ring material of the connector can vary depending on size. Article no. Article name "see LOKRING Assembly instruction.

VULKAN LOKRING 12 | LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 Please note: Both sides have the same dimensions (ODC/ODT/LID) and the shape / ring material of the connector can vary depending on size. Article no. Article name Dimension Notes

VULKAN LOKRING LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 | 13 Article no. Article name Dimension Notes

14 | LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 VULKAN LOKRING Article no. Article name ODTI ODTE ODR LID LST

VULKAN LOKRING LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 | 15 Article no. Article name Dimension Notes ODTI ODTO ODTS ODD L (approx.) LTI (approx.) LTO (approx.) LTS (approx.)

16 | LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 VULKAN LOKRING Article no. Article name Dimension Notes ODTI ODTO ODTS ODD L (approx.) LTI (approx.) LTO (approx.) LTS (approx.)

VULKAN LOKRING LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 | 17Desiccant: XH-9 Article no. Article name Dimension Notes ODTI ODTO ODTS ODD L (approx.) LTI (approx.) LTO (approx.) LTS (approx.)

VULKAN LOKRING 18 | LOKRING® CONNECTORS TYPE 00 TECHNICAL DOCUMENTATION & SUBMITTAL VERSION 1.2 Article no. Article name Dimension Notes ODT OD (approx.) L (approx.) * with schrader valve ** without schrader valve mm | in mm mm