Overview

This document details technical specifications and dimensional data for hydraulic demolition jaws and pulverizers across CK series models CK07, CK11, CK14, CK21, CK28, and CK36. It covers hydraulic parameters, model capacities, weights, dimensions, jaw types, and recommendations for proper equipment selection and use.

Hydraulic Specifications

• Operating Pressure: Two standard ranges: 120 bar (1739 psi) for low pressure and up to 350 bar (5072 psi) for high pressure applications.
• Flow Rates: Vary by model and pressure range, from 5 to 60 L/min (1 to 15 GPM) for low pressure, and 70 to 400 L/min (18 to 105 GPM) for high pressure.

Model Capacities and Weight

• Operating Weight: Ranges from 485 kg (1078 lb) for CK07 to 2090 kg (4644 lb) for CK36.
• Recommended Carrier Weight: Specified per model, e.g., CK07 suited for carriers weighing 16,000 to 28,000 lb, CK36 for 75,000 to 110,000 lb.

Dimensional Data

Key dimensions (length, width, height, jaw thickness) are provided in millimeters and inches for each model. For example:

• CK07: Length ~1595 mm (62.8 in), Width ~520 mm (20.5 in), Jaw thickness 50 mm (2.0 in).
• CK36: Length ~2555 mm (100.6 in), Width ~957 mm (37.7 in), Jaw thickness 90 mm (3.5 in).

Jaw Types and Configurations

• Available jaw types include standard demolition jaws (type D), pulverizer jaws (type P), and combination jaws (type R).
• Jaw types are matched to specific models and applications, with dimensional variations to suit different demolition tasks.

Technical Data Summary for CK Series Models

1. Load Capacities and Weight Specifications

2. Dimensional Specifications

3. Jaw Types and Models

• Jaw types include S, CH, and T.
• Jaw type S is used with initial CK models.
• Jaw type CH is applied in mid-range CK models.
• Jaw type T is designated for tank models CK11 through CK36.

4. Tank Model Dimensions and Capacities

5. Critical Parameters and Recommendations

• Ensure hydraulic flow and pressure conform to specified ranges for each model to maintain performance and safety.
• Select jaw type (demolition, pulverizer, combination) based on specific demolition needs.
• Verify carrier machine weight compatibility with jaw model to prevent operational issues.
• Adhere strictly to load capacity and weight limits for safe operation.
• Confirm dimensional compatibility, especially thickness and jaw size, to ensure proper fit and function.

Summary

This document serves as a comprehensive technical reference for selecting and configuring CK series demolition jaws and pulverizers. It provides detailed hydraulic requirements, dimensional data, load capacities, and jaw configurations to guide equipment matching and safe, effective use in demolition projects.