Catalogs >
VTDRIVssE Technology Limited >
VTdrive V6-H-D6 Frequency Converter for Crance&Hoist

VTdrive V6-H-D6 Frequency Converter for Crance&Hoist
4Pages

Catalog excerpts

VTdrive V6-H-D6 Frequency Converter for Crance&Hoist - 1

VectorqueTM V6-H-D6 CRANE&HOIST DRIVES

VTdrive V6-H-D6 Frequency Converter for Crance&Hoist - 2

1. Change reason 1. Added brake working time and not working time 2. Closed loop vector control model disabled RS485 terminal communication 3. Enhance brake control 4. Torque given could setting follow running direction 5. Block output when torque control 6. Cancel display recent revised 10 parameters 7. Automatic limit speed 8. Cancel analog curve 3,4 2. Description of changed function code Code name Setting range Code selection FDT1 level upper limit FDT1 level lower limit Brake not working time Brake working time 0: running command start timing(H0.04), time up or reach current threshold...

Open the catalog to page 2

VTdrive V6-H-D6 Frequency Converter for Crance&Hoist - 3

4: block output when meet both of above two conditions (reserved) H0.12 Block output torque preset value when torque control H0.13 Block output frequency preset value Hysteresis of dynamic braking Automatic speed limiting P9.05 Upper limit=P0.13 when no load Hysteresis of dynamic braking Upper limit of frequency=H0.22 when load reach given value Frequency upper limit of full load Upper limit of frequency=P0.16 when full load Processing cycle of adjusting present frequency upper limit Dynamic braking begin with PA.11 stop at PA.11-H.014 (output current reach full load current) H0.23 upper...

Open the catalog to page 3

VTdrive V6-H-D6 Frequency Converter for Crance&Hoist - 4

If want torque given direction follow running command the torque given is FWD when has FWD command, the torque given is REV when has REV command. For example: H0.10=1, when has FWD command torque given is +20%, when has REV command torque given is -20%; H0.10=2, when has FWD command torque given is -20%, when has REV command torque given is +20%; H0.10=0, no matter FWD or REV command the torque given always +20%. Shenzhen VTdrive Technology Co.,Ltd. Tel: +86-755-23060667 Fax: +86-755-33671802 Website: www.vtdrive.com E-mail: info@vtdrive.com Headquarters Address: 6F, Xinfeng Building B,...

Open the catalog to page 4