CSM Mechanical Chip Spreader Performance Features: The CSM offers the simple control and routine application of a mechanical chip spreader. Simple to operate, hydraulic assist power gate lever allows driver to infinitely vary the gate opening from the • Mechanical Drive • 10’ to 15’ (3.05 to 4.57 m) Spread Hopper • 160 hp (121.6 kw) Cummins Tier 3 Diesel Engine • Automatic Conveyor Belt Controls operator’s station. To ensure coverage is consistently • Swing-Over Control Console smooth, immediate real-time adjustments can be • Fixed-Wing Hopper Design made by the operator. With its fixed-wing hopper • 3.5 Cubic Yards (2.6 Cubic Meter) Capacity Material Hopper design and enhanced clean out operations, the • Hydraulic Assist Power Gate Control CSM continues to serve as a dependable, low • Features That Allow For Excellent Clean Out Ability maintenance solution. • Low Maintenance Performance • Versati

Specifications Dimensions Cummins turbocharged diesel, Tier 3 – 160 hp (121.6 kw) - Fuel: 50 gallons (189 l) - Hydraulic reservoir: 50 gallons (189 l) Rear Hopper - Capacity: 3.5 cubic yards (2.67 cubic m) - Receiving width: 9’ 6” (2.89 m) - Feed gated for each conveyor adjustable from operator’s platform Spread Hopper - Capacity: 2.93 cubic yards (2.2 cubic m), struck - Width: 10’ (3.05 m) - Hydraulic power assisted gate open/close allows operator to infinitely vary the gate opening from operator’s station - Redial cut-off gates adjustable in 6” (152 mm) and 12” (304 mm) wide increments - Full...