CSM & CSH
4Pages

Specifications CSM MECHANICAL DRIVE CHASSIS POWER TRAIN REAR AXLE FRONT AXLE STEERING BRAKES WHEELS AND TIRES HITCH HYDRAULIC SYSTEM APPLICATION RATE CONTROL REAR RECEIVING SYSTEM CONVEYORS FRONT SPREAD HOPPER SPREAD HOPPER WIDTHS Lower members are structural box beams, unit welded to rear and front axle carriers. Conveyor sides have welded front triangular bracing to form a completely unitized structure. Hydrostatic front wheel drive with closed loop feedback. Three modes of operation for speeds 0-20 mph (0-32 km/hr) including automatic speed control. Oscillating truck-type, 16,000-lb rated capacity. Orbital type, full hydraulic powered, no mechanical linkage. 4-wheel hydraulic power. Front: drum-type; rear: disc-type Chip Spreaders Lower members are structural box beams, unit welded to rear and front axle carriers. Conveyor sides have welded front triangular bracing to form a completely unitized structure. 14” diameter clutch and 5-speed forward, 1-speed reverse transmission with 2-speed rear axle. Option: Hydraulic reversing capability for speeds of 0-19 mph (0-30.6 km/hr). Cummins Model QSB4.5, 4-cylinder, turbo-charged diesel, 275 cu in, 160 HP at 2,200 rpm. Liquid-cooled with heavy-duty radiator, variable speed governor, dry-type air cleaner, electric starter, alternator, battery and fuel-water separator Electric 2-speed, all planetary drive, 26,000-lb rated capacity. Oscillating truck-type, 25,000-lb rated capacity. Orbital type, full hydraulic powered, no mechanical linkage. 2-wheel hydraulic power assist disc brakes in front; hydrostatic dynamic braking with self-energizing, disc-type emergency/park brakes in rear. Four 385/65R 22.5, load range J duplex radial. No options. Budd disc-type with 11.00 x 22.5, load range H, 16-ply rated, truck-type with highway tread. Options: 11.00 x 22.5, load range H, 16-ply rated dual rear tires Four 385/65R 22.5, load range J, duplex radial Positive locking, hydraulic release with safety catch. Chip Spreaders Caterpillar Model C6.6, 6-cylinder, turbo-charged diesel, 402 cu in, 173 HP at 2,200 rpm. Liquid-cooled with heavy-duty radiator, variable speed governor, dry-type air cleaner, electric starter, alternator, battery and fuel-water separator. 4-wheel drive: planetary final drives, 20,000-lb capacity. 2-wheel drive: planetary final drives, 22,000-lb capacity. Positive locking, hydraulic release with safety catch, hydraulic height adjustment. 3-section hydraulic pump directly driven from engine crankshaft, independent circuits for each conveyor, hopper spread roll and agitator, power steering, power brakes, 30-gal (113.5 l) reservoir, filters, cooler and valves included. Not an available feature with the CSM model. Single variable displacement pump and valve provide independent circuits for each conveyor, hopper spread roll and agitator, power steering, power brakes, 30-gal (113.5l) reservior, filters, cooler and valves included. 9’6” (2.9 m) wide, 3.5 cu yd (2.68 cu m) struck capacity with feed control gates adjustable from operator platform. 11’10” (3.6 m) wide unfolded, 4.0 cu yd (3.06 cu m) struck capacity with paver-style folding wings, feed control gates adjustable from operator platform. Two independently-operated, 20” (51 cm) wide, hydraulically-driven belts. Full length side skirting, self-cleaning tail pulley with adjustable and removable trough idlers. Variable speed conveyors and automatic conveyor controls. Radial cut-off gates adjustable in 6” and 12” (15.2 cm and 30.5 cm) wide increments, full width reject screen (grizzly). Hydraulic power assist gate, open/close control. 10’ (3.04 m) width standard. Optional widths: 11’, 12’, 13’, 13’6”, 14’, 14’6”, and 15’. Left- and right-hand stations with suspension seats with swing-over steering wheel and control/instrument panel. Two independently-operated, 20” (51 cm) wide, hydraulically-driven belts. Full length side skirting, self-cleaning tail pulley with adjustable and removable trough idlers. Variable speed conveyors and automatic conveyor controls. Single variable displacement travel pump system to maintain accurate application of aggregate on road surface regardless of changes in speed. Electro-hydraulic power gate control of 6” and 12” (15.2 cm and 30.5 cm) wide increments with infinitely variable gate openings and automatic shut off. Right-hand, full-length, non-skid walkway and safety handrails with conveyor and deflector controls; second hitch control. Ignition switch; engine throttle; conveyor controls; hitch controls; 2-speed control; graphic display engine gauges for water temperature, engine oil pressure, tachometer, fuel, volt meter, hour meter, hydraulic temperature, warning system and engine fault codes; lockable cover. WARRANTY MISCELLANEOUS One year warranty 50-gal (189.3 l), lockable fuel tank; toolbox; ladders each side and safety handrails; electric backup alarm and warning horn; light package. 10’ (3.04 m) width standard. Optional widths: 11’, 12’, 13’, 13’6”, 14’, 14’6”, and 15’. Left- and right-hand stations with suspension seats with swing-over steering wheel and control/instrument panel. Automatic conveyor control to control amount of material in spread hopper. Right-hand, full-length, non-skid walkway and safety handrails with conveyor and deflector controls; second hitch control. Ignition switch; joystick control of speed and direction; engine throttle; spread hopper/conveyor controls; hitch controls; park brake and 4-wheel drive; graphic display of machine settings and engine gauges for water temperature, engine oil pressure, tachometer, fuel, volt meter, hour meter, hydraulic temperature, warning system and engine fault codes; lockable cover. One year warranty 50-gal (189.3 l), lockable fuel tank; toolbox; ladders each side and safety handrails; electric backup alarm and warning horn; light package. LeeBoy Highway Yellow Aggregate placement screen, hydraulic reverse, left-hand spread hopper walkway and handrails, front hopper railings, second front hopper agitator, vandalism protection package, non-standard paint. LeeBoy Highway Yellow Remote hydraulic individual gate control, aggregate placement screen, left-hand spread hopper walkway and handrail, front hopper railings, second front hopper agitator, vandalism protection package, non-standard paint. DRIVER STATION OPERATOR STATION LeeBoy makes continuous improvements to all its products and reserves the right to change specifications without notice. Photos and illustrations may contain standard and optional equipment. Contact your LeeBoy dealer: VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • 704.966.3300 Chip Spreaders Features include: • • • • Automatic Conveyor Belt Controls Automatic Application Rate Control (CSH only) Positive Traction Control (CSH only) Swing-Over Control Console • 10- to 15-foot Spread Hoppers • 160 HP Cummins Engine (CSM only) • 173 - 203 HP Caterpillar Engine (CSH only) Designed with the Paving Professional in Mind.®