Catalogs >
VSCom Germany >
680_data

680_data
4Pages

Catalog excerpts

Vision Systems GmbH - NetCom 811 PRO VS Vision Systems GmbH / Part Number 680 Features Controls 8 RS232 devices located virtually anywhere via Ethernet or Internet q Secure encryption on Ethernet q LAN interface 10BaseT/100BaseTx Ethernet q Driver automatically finds NetCom devices in the network q Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP q Automatic mode switching between Driver and Raw Mode q Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN q Contact Online… NetCom 811 PRO Quick Link: | Features | More Pictures | Overview | Application | Hardware | Interface | Performance | Operating Modes | Power and Environment | Special Features | Security | Ordering Information | Optional Accessories | More Pictures Klick on the thumbnails for the large picture … >Back to top Overview NetCom 811 PRO is an industrial-strength network-based serial device server for connecting eight RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to a network running TCP/IP. NetCom 811 PRO provides completely secured communication for configuration and to the attached serial devices, this is implemented by openVPN tunnel software. Further each serial port can control a modem for Dial-In and -Out via PPP. In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial ports. NetCom 811 PRO can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation. Application Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system Retail system SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control Hardware Processor Connector type DSUB 9 male for serial Port RJ45 for Ethernet

Open the catalog to page 1

Vision Systems GmbH - NetCom 811 PRO Interface Ethernet interface TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS Serial interface Available Modes TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND >Back to top Performance Speed None, even, odd, space, mark Data bits Stop bits Operating Modes Driver mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol. Raw data transfer over TCP/IP. Accepts multiple incoming connections. Raw data transfer over TCP/IP. Connects to...

Open the catalog to page 2

Vision Systems GmbH - NetCom 811 PRO Operating Temp Storage Temp SECC sheet metal (1mm) Special Features Installation Configuration utility automatically finds NetCom devices in the network Operating mode Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used. Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even...

Open the catalog to page 3

Vision Systems GmbH - NetCom 811 PRO

Open the catalog to page 4

680_data 4Pages

Catalog excerpts

All VSCom Germany catalogs and technical brochures

680_data
4Pages