Vision Systems GmbH - NetCom 813RM PRO VS Vision Systems GmbH / Part Number 677 Features Controls 8 RS232/422/485 devices located virtually anywhere via Ethernet or Internet q Secure encryption on Ethernet q LAN interface 10BaseT/100BaseTx Ethernet q Driver automatically finds NetCom devices in the network q Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP q Automatic mode switching between Driver and Raw Mode q Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN q Supports ART (Automatic Receive Transmit control) q RS232/422/485 interface selectable by Switches and Software q Contact Online… NetCom 813RM PRO Quick Link: | Features | More Pictures | Overview | Application | Hardware | Interface | Performance | Operating Modes | Power and Environment | Special Features | Security | Ordering Information | Optional Accessories | More Pictures Klick on the thumbnails for the large picture … >Back to top Overview NetCom 813RM PRO is an industrial-strength network-based serial device server for connecting eight RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to a network running TCP/IP. NetCom 813RM PRO provides completely secured communication for configuration and to the attached serial devices, this is implemented by openVPN tunnel software. Further each serial port can control a modem for Dial-In and -Out via PPP. In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial ports. NetCom 813RM PRO can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation. Application Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system Retail system SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control Hardware Processor

Vision Systems GmbH - NetCom 813RM PRO Connector type DSUB 9 male for serial Port RJ45 for Ethernet >Back to top Interface Ethernet interface TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS Serial interface RS232/422/485 selected by software or DIP-switch Available Modes RS232 full duplex RS422 full duplex RS485 4 wire, full duplex RS485 2 wire, half duplex, with echo RS485 2 wire, half duplex, without echo RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS422: Tx+/-, Rx+/-, GND RS485 2 wire: Data+/-, GND RS485 4 wire: Tx+/-, Rx+/-, GND Controlled by ART (Automatic Receive Transmit...

Vision Systems GmbH - NetCom 813RM PRO A Modem attached to a serial port provides Dial-In/-Out. This allows access to the serial ports without a dedicated Ethernet connection. >Back to top Power and Environment Power requirements 258×149×45 mm³ (W×L×H) 278×155×46 mm³ with DB9 connectors and DIN rail mounting kit 19" 1HU Rackmount Operating Temp Storage Temp SECC sheet metal (1mm) Special Features Installation Configuration utility automatically finds NetCom devices in the network Operating mode Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible...

Vision Systems GmbH - NetCom 813RM PRO Packing list NetCom 813RM PRO Power cord 19" mounting kit CD-ROM with Driver and configuration software Printed Quick Installation Guide >Back to top DIN-Rail mounting kit >Back to top

Vision Systems GmbH - NetCom 813RM PRO