*mydirectindustry

6701_data

Product catalog summary

Features
ModGate 413 is a versatile gateway that controls four Modbus lines via Ethernet or Internet. It supports various protocols including TCP/IP, DHCP, ICMP, HTTP, and DNS, and offers configuration through a web browser. The device allows selection between RS232 and RS485 interfaces via software.

Overview
The ModGate 413 connects Modbus lines to a TCP/IP network, facilitating communication without platform or distance limitations. It supports Modbus/TCP for network communication and can be configured for Modbus/ASCII or Modbus/RTU on serial ports. Configuration is web-based, with options for serial parameters and Modbus address mapping.

Application
Ideal for industrial, factory, laboratory automation, automatic warehouse control, wafer fabrication, SCADA, and building automation systems.

Hardware
Equipped with an ARM 9 processor, 16MB SDRAM, and 2MB Flash memory. It features DSUB 9 male connectors for serial ports and RJ45 for Ethernet.

Interface
Auto-detecting Ethernet interface supporting 10BaseT/100BaseTx. The serial interface is selectable between RS232 and RS485, with a speed of up to 115200 bps.

Performance
Supports speeds up to 115200 bps with options for parity, data bits, and stop bits. No IRQ or I/O address is required.

Operating Modes
Supports Modbus RTU/ASCII protocols, direct mapping of Modbus addresses, and promiscuous mode for mapping serial ports to TCP connections.

Power and Environment
Requires 9-30V DC power, with an adapter provided. Operating temperature ranges from 0°C to 55°C, and storage from −20°C to 85°C. The device is housed in a SECC sheet metal case.

Special Features
Includes dip switches for setting a temporary IP address, ART for RS485, DNS support, and firmware updates via web browser. LEDs indicate power, serial transmission, and Ethernet status.

Security
The web interface is password protected, with options to change the password.

Ordering Information
Product number 6701, includes ModGate 413, power supply adapter, and a CD-ROM with the user manual.

Optional Accessories
DK 35A DIN-Rail mounting kit available.

Catalog excerpts

Vision Systems GmbH - ModGate 413 Features Controls 4 Modbus lines located virtually anywhere via Ethernet or Internet LAN interface 10BaseT/100BaseTx Ethernet Configuration over WEB Browser Supports TCP/IP, DHCP, ICMP, HTTP, DNS Supports ART (Automatic Receive Transmit control) RS232/485 interface selectable by Software Zoom in Picture ModGate 413 Quick Link: | Features | Overview | Application | Hardware | Interface | Performance | Operating Modes | Power and Environment | Special Features | Security | Ordering Information | Optional Accessories | Overview Modgate 413 is an industrial-strength Modbus-Network gateway for connecting four Modbus lines to a network running TCP/IP. It operates without platform and distance limitation. ModGate 413 uses Modbus/TCP for communication on the network. The serial ports are configured for Modbus/ASCII or Modbus/RTU, while the serial lines are physically set for RS232 or RS485. The messages received on the network are sent to the serial lines, messages from the serial ports are sent via network. The configuration of ModGate 413 is done via HTTP. The user interface is based on Web 2.0 to provide an easy handling of the options. Besides typical serial parameters the configuration includes RS232/485 for serial physical parameters. Further a Modbus address mapping table is available, defining a target port for a certain Modbus address. ModGate devices are available with 1 up to 8 serial ports, optional also with WLAN plus Ethernet. Read the News Article… Application Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system SCADA system Building automation system Hardware Processor Connector type DSUB 9 male for serial Port RJ45 for Ethernet >Back to top Interface Ethernet interface TCP/IP, DHCP, ICMP, HTTP, DNS Serial interface Available Modes RS232 full duplex RS485 2-wire, half duplex, without echo RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS485: 2 wire Data+/-, GND Controlled by ART (Automatic Receive Transmit control)

Open the catalog to page 1

Vision Systems GmbH - ModGate 413 Performance Speed Data bits Stop bits Operating Modes Modbus RTU/ASCII Modbus RTU or Modbus ASCII protocol selected for each serial port individually Direct mapping of Modbus addresses to serial ports or TCP connections Mapping of serial ports to TCP connections >Back to top Power and Environment Power requirements Power supply Adapter 12V DC, 1A. Connected by Terminal block 167× 99×29 mm³ (W×L×H) 189×102×30 mm³ with DB9 connector and DIN rail mounting kit Operating Temp Storage Temp SECC sheet metal (1mm) Special Features Installation Operating mode Dip switches...

Open the catalog to page 2

Vision Systems GmbH - ModGate 413 Ordering Information Art.No Product Name Packing list ModGate 413 Power supply adapter 12V, 1000mA CD-ROM with user manual >Back to top DIN-Rail mounting kit >Back to top

Open the catalog to page 3

Vision Systems GmbH - ModGate 413 Full size product image

Open the catalog to page 4

6701_data

6701_data

Catalog excerpts

All VSCom Germany catalogs and technical brochures