Catalogs >
VSCom Germany >
670_data

670_data
4Pages

Catalog excerpts

Vision Systems GmbH - NetCom 811 VS Vision Systems GmbH / Part Number 670 Features Can control 8x RS232 devices located virtually anywhere (via Ethernet or Internet) q LAN interface 10BaseT/100BaseTx Ethernet q Driver automatically finds NetCom devices in the network q Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP q Automatic mode switching between Driver and Raw Mode q Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS q Contact Online… NetCom 811 Quick Link: | Features | More Pictures | Overview | Application | Hardware | Interface | Performance | Operating Modes | Power and Environment | Special Features | Security | Ordering Information | Optional Accessories | More Pictures Klick on the thumbnails for the large picture … >Back to top Overview NetCom 811 is an industrial-strength network-based serial device server for connecting eight RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP. In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port. NetCom 811 can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation. Application Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system Retail system SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control Hardware Processor Connector type RJ45 for LAN, DSUB 9 male for serial Port >Back to top

Open the catalog to page 1

Vision Systems GmbH - NetCom 811 TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS Serial interface Available Modes TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND >Back to top Performance Speed None, even, odd, space, mark Data bits Stop bits Operating Modes Driver mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol. Raw data transfer over TCP/IP. Accepts multiple incoming connections. Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for...

Open the catalog to page 2

Vision Systems GmbH - NetCom 811 Configuration utility automatically finds NetCom devices in the network Operating mode Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used. Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP special VScom MIB included Domain Name Server support Special precautions for Firewall environments Firmware update over WEB Browser, Telnet, ComPort LEDs for Power, Tx, Rx,...

Open the catalog to page 3

Vision Systems GmbH - NetCom 811

Open the catalog to page 4

670_data 4Pages

Catalog excerpts

All VSCom Germany catalogs and technical brochures

670_data
4Pages